Using lowpass and highpass filters to form UWB bandpass filter

Sanjay Devkumar, Chandan Kumar Chakrabarty

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, a new UWB Bandpass filter is proposed. The combination of an open-circuited lowpass filter with a short-circuited highpass filter is used to dsign a UWB BPF. This papper also explains the new approach in designing a UWB BPF. The performanece of this design in terms of its reflection loss, isertion loss and group delay was also compared with the previously designed UWB BPF's Simu1ations were carried out using the CST Microwave Studio software to demonstrate the reflection loss (S11) insertion loss (S21) and group delay of this design.

Original languageEnglish
Title of host publicationProceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008
Pages162-165
Number of pages4
DOIs
Publication statusPublished - 01 Dec 2008
EventIEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008 - Putrajaya, Malaysia
Duration: 26 Aug 200828 Aug 2008

Publication series

NameProceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008

Other

OtherIEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008
CountryMalaysia
CityPutrajaya
Period26/08/0828/08/08

Fingerprint

Bandpass filters
Ultra-wideband (UWB)
Group delay
Group
Studios
Insertion losses
Microwaves
software

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications
  • Electrical and Electronic Engineering
  • Communication

Cite this

Devkumar, S., & Kumar Chakrabarty, C. (2008). Using lowpass and highpass filters to form UWB bandpass filter. In Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008 (pp. 162-165). [4814262] (Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008). https://doi.org/10.1109/NCTT.2008.4814262
Devkumar, Sanjay ; Kumar Chakrabarty, Chandan. / Using lowpass and highpass filters to form UWB bandpass filter. Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. pp. 162-165 (Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008).
@inproceedings{7886efba29fd432082591d9629489688,
title = "Using lowpass and highpass filters to form UWB bandpass filter",
abstract = "In this paper, a new UWB Bandpass filter is proposed. The combination of an open-circuited lowpass filter with a short-circuited highpass filter is used to dsign a UWB BPF. This papper also explains the new approach in designing a UWB BPF. The performanece of this design in terms of its reflection loss, isertion loss and group delay was also compared with the previously designed UWB BPF's Simu1ations were carried out using the CST Microwave Studio software to demonstrate the reflection loss (S11) insertion loss (S21) and group delay of this design.",
author = "Sanjay Devkumar and {Kumar Chakrabarty}, Chandan",
year = "2008",
month = "12",
day = "1",
doi = "10.1109/NCTT.2008.4814262",
language = "English",
isbn = "9781424422159",
series = "Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008",
pages = "162--165",
booktitle = "Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008",

}

Devkumar, S & Kumar Chakrabarty, C 2008, Using lowpass and highpass filters to form UWB bandpass filter. in Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008., 4814262, Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008, pp. 162-165, IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008, Putrajaya, Malaysia, 26/08/08. https://doi.org/10.1109/NCTT.2008.4814262

Using lowpass and highpass filters to form UWB bandpass filter. / Devkumar, Sanjay; Kumar Chakrabarty, Chandan.

Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. p. 162-165 4814262 (Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Using lowpass and highpass filters to form UWB bandpass filter

AU - Devkumar, Sanjay

AU - Kumar Chakrabarty, Chandan

PY - 2008/12/1

Y1 - 2008/12/1

N2 - In this paper, a new UWB Bandpass filter is proposed. The combination of an open-circuited lowpass filter with a short-circuited highpass filter is used to dsign a UWB BPF. This papper also explains the new approach in designing a UWB BPF. The performanece of this design in terms of its reflection loss, isertion loss and group delay was also compared with the previously designed UWB BPF's Simu1ations were carried out using the CST Microwave Studio software to demonstrate the reflection loss (S11) insertion loss (S21) and group delay of this design.

AB - In this paper, a new UWB Bandpass filter is proposed. The combination of an open-circuited lowpass filter with a short-circuited highpass filter is used to dsign a UWB BPF. This papper also explains the new approach in designing a UWB BPF. The performanece of this design in terms of its reflection loss, isertion loss and group delay was also compared with the previously designed UWB BPF's Simu1ations were carried out using the CST Microwave Studio software to demonstrate the reflection loss (S11) insertion loss (S21) and group delay of this design.

UR - http://www.scopus.com/inward/record.url?scp=67650114567&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67650114567&partnerID=8YFLogxK

U2 - 10.1109/NCTT.2008.4814262

DO - 10.1109/NCTT.2008.4814262

M3 - Conference contribution

SN - 9781424422159

T3 - Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008

SP - 162

EP - 165

BT - Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008

ER -

Devkumar S, Kumar Chakrabarty C. Using lowpass and highpass filters to form UWB bandpass filter. In Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. p. 162-165. 4814262. (Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008). https://doi.org/10.1109/NCTT.2008.4814262