Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista

Aishwarya Taur, Sunita M. Badave, Sanjeevikumar Padmanaban, Mahajan Sagar Bhaskar, Vigna K. Ramachandaramurthy, Jens Bo Holm-Nielsen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In order to keep generation and distribution of power at high priority, two switchgear playing a key role i) Air insulated Substation/Switchgear (AIS) ii) Gas Insulated Substation/Switchgear (GIS). Nowadays, the GIS innovation began with the view of broad essential research and from that point forward the administration encounter together with creative advancement work has presented this system to a sheltered and natural good, a most dependable and accessible component of the power supply. Controllers always play a significant role in the power sector. GIS has low-Local Control Cabinet (LCC) cost and can be utilized for indoor and open-air applications. The local control cabinet is controlling part in Gas Insulated Switchgear. Its task is to follow the logic and interlocks that are set accordingly. The Problem came across while testing LCC panel is studied in this paper and solution to this is found out. In this paper, a test kit for LCC is proposed which will work as a dummy GIS bay. The contact status is found out whether NO or NC by studying connection drawings. This status fed to the relays in the kit through PLC-HMI programming and testing will be done. The proposed test simulation kit allows conducting a full functional assessment of LCC panel, panel wiring, interlock wiring, component functioning etc.

Original languageEnglish
Title of host publicationProceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781728132020
DOIs
Publication statusPublished - Apr 2019
Event13th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019 - Sonderborg, Denmark
Duration: 23 Apr 201925 Apr 2019

Publication series

NameProceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019

Conference

Conference13th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019
CountryDenmark
CitySonderborg
Period23/04/1925/04/19

Fingerprint

Electric switchgear
Testing
Gases
Simulation
Electric wiring
Functional assessment
Relay
Sector
Programming
Programmable logic controllers
Design
Gas
Contact
Logic
Contacts (fluid mechanics)
Controller
Innovation
Costs
Controllers
Air

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Control and Optimization
  • Energy Engineering and Power Technology
  • Renewable Energy, Sustainability and the Environment

Cite this

Taur, A., Badave, S. M., Padmanaban, S., Bhaskar, M. S., Ramachandaramurthy, V. K., & Holm-Nielsen, J. B. (2019). Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista. In Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019 [8862400] (Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CPE.2019.8862400
Taur, Aishwarya ; Badave, Sunita M. ; Padmanaban, Sanjeevikumar ; Bhaskar, Mahajan Sagar ; Ramachandaramurthy, Vigna K. ; Holm-Nielsen, Jens Bo. / Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista. Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019).
@inproceedings{1c80587f416d4277b21e6cdf84b563ec,
title = "Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista",
abstract = "In order to keep generation and distribution of power at high priority, two switchgear playing a key role i) Air insulated Substation/Switchgear (AIS) ii) Gas Insulated Substation/Switchgear (GIS). Nowadays, the GIS innovation began with the view of broad essential research and from that point forward the administration encounter together with creative advancement work has presented this system to a sheltered and natural good, a most dependable and accessible component of the power supply. Controllers always play a significant role in the power sector. GIS has low-Local Control Cabinet (LCC) cost and can be utilized for indoor and open-air applications. The local control cabinet is controlling part in Gas Insulated Switchgear. Its task is to follow the logic and interlocks that are set accordingly. The Problem came across while testing LCC panel is studied in this paper and solution to this is found out. In this paper, a test kit for LCC is proposed which will work as a dummy GIS bay. The contact status is found out whether NO or NC by studying connection drawings. This status fed to the relays in the kit through PLC-HMI programming and testing will be done. The proposed test simulation kit allows conducting a full functional assessment of LCC panel, panel wiring, interlock wiring, component functioning etc.",
author = "Aishwarya Taur and Badave, {Sunita M.} and Sanjeevikumar Padmanaban and Bhaskar, {Mahajan Sagar} and Ramachandaramurthy, {Vigna K.} and Holm-Nielsen, {Jens Bo}",
year = "2019",
month = "4",
doi = "10.1109/CPE.2019.8862400",
language = "English",
series = "Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
booktitle = "Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019",
address = "United States",

}

Taur, A, Badave, SM, Padmanaban, S, Bhaskar, MS, Ramachandaramurthy, VK & Holm-Nielsen, JB 2019, Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista. in Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019., 8862400, Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019, Institute of Electrical and Electronics Engineers Inc., 13th IEEE International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019, Sonderborg, Denmark, 23/04/19. https://doi.org/10.1109/CPE.2019.8862400

Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista. / Taur, Aishwarya; Badave, Sunita M.; Padmanaban, Sanjeevikumar; Bhaskar, Mahajan Sagar; Ramachandaramurthy, Vigna K.; Holm-Nielsen, Jens Bo.

Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8862400 (Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista

AU - Taur, Aishwarya

AU - Badave, Sunita M.

AU - Padmanaban, Sanjeevikumar

AU - Bhaskar, Mahajan Sagar

AU - Ramachandaramurthy, Vigna K.

AU - Holm-Nielsen, Jens Bo

PY - 2019/4

Y1 - 2019/4

N2 - In order to keep generation and distribution of power at high priority, two switchgear playing a key role i) Air insulated Substation/Switchgear (AIS) ii) Gas Insulated Substation/Switchgear (GIS). Nowadays, the GIS innovation began with the view of broad essential research and from that point forward the administration encounter together with creative advancement work has presented this system to a sheltered and natural good, a most dependable and accessible component of the power supply. Controllers always play a significant role in the power sector. GIS has low-Local Control Cabinet (LCC) cost and can be utilized for indoor and open-air applications. The local control cabinet is controlling part in Gas Insulated Switchgear. Its task is to follow the logic and interlocks that are set accordingly. The Problem came across while testing LCC panel is studied in this paper and solution to this is found out. In this paper, a test kit for LCC is proposed which will work as a dummy GIS bay. The contact status is found out whether NO or NC by studying connection drawings. This status fed to the relays in the kit through PLC-HMI programming and testing will be done. The proposed test simulation kit allows conducting a full functional assessment of LCC panel, panel wiring, interlock wiring, component functioning etc.

AB - In order to keep generation and distribution of power at high priority, two switchgear playing a key role i) Air insulated Substation/Switchgear (AIS) ii) Gas Insulated Substation/Switchgear (GIS). Nowadays, the GIS innovation began with the view of broad essential research and from that point forward the administration encounter together with creative advancement work has presented this system to a sheltered and natural good, a most dependable and accessible component of the power supply. Controllers always play a significant role in the power sector. GIS has low-Local Control Cabinet (LCC) cost and can be utilized for indoor and open-air applications. The local control cabinet is controlling part in Gas Insulated Switchgear. Its task is to follow the logic and interlocks that are set accordingly. The Problem came across while testing LCC panel is studied in this paper and solution to this is found out. In this paper, a test kit for LCC is proposed which will work as a dummy GIS bay. The contact status is found out whether NO or NC by studying connection drawings. This status fed to the relays in the kit through PLC-HMI programming and testing will be done. The proposed test simulation kit allows conducting a full functional assessment of LCC panel, panel wiring, interlock wiring, component functioning etc.

UR - http://www.scopus.com/inward/record.url?scp=85074150424&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85074150424&partnerID=8YFLogxK

U2 - 10.1109/CPE.2019.8862400

DO - 10.1109/CPE.2019.8862400

M3 - Conference contribution

AN - SCOPUS:85074150424

T3 - Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019

BT - Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Taur A, Badave SM, Padmanaban S, Bhaskar MS, Ramachandaramurthy VK, Holm-Nielsen JB. Testing of local control cabinet in gas insulated switchgear using design of simulation kit - Revista. In Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8862400. (Proceedings - 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2019). https://doi.org/10.1109/CPE.2019.8862400