Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling

Moaz H. Ali, M. N.M. Ansari, Basim A. Khidhir, Bashir Mohamed, A. A. Oshkour

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Titanium alloy is the most significant material used in the aviation industry because of their properties such as high strength and corrosion resistant. However, it is considered one of the most challenging areas for all industrialists due to their poor machinability. Therefore, machining process needs to be controlled by selecting the optimal cutting conditions to obtain the best machining responses at the same time which is very difficult and involves high cost. Hence, this review paper presents the investigation of an agreement between the simulation results and experimental findings to evaluate the finite element modeling (FEM) for prediction of the machining parameters of titanium alloy (Ti-6Al-4V). Computer-aided engineering tools, especially software which was used to perform the simulation. Four types of finite element software have been focused during the machining process of titanium alloy (Ti-6Al-4V) such as AdvantEdge, ABAQUS/EXPLICIT, DEFORM, and FORG software. The simulation results of FEM proved an agreement with the experimental data during the machining process of titanium alloy (Ti-6Al-4V). The FEM permits to reduce the cost of manufacturing in terms of prolonging the cutting tool life and saving machining time.

Original languageEnglish
Pages (from-to)315-324
Number of pages10
JournalJournal of the Brazilian Society of Mechanical Sciences and Engineering
Volume36
Issue number2
DOIs
Publication statusPublished - Feb 2014

Fingerprint

Titanium alloys
Machining
Machinability
Computer aided engineering
ABAQUS
Cutting tools
Aviation
Costs
Corrosion
Industry

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

Cite this

@article{14cadda8e56a4ff490b3ca0908c874bc,
title = "Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling",
abstract = "Titanium alloy is the most significant material used in the aviation industry because of their properties such as high strength and corrosion resistant. However, it is considered one of the most challenging areas for all industrialists due to their poor machinability. Therefore, machining process needs to be controlled by selecting the optimal cutting conditions to obtain the best machining responses at the same time which is very difficult and involves high cost. Hence, this review paper presents the investigation of an agreement between the simulation results and experimental findings to evaluate the finite element modeling (FEM) for prediction of the machining parameters of titanium alloy (Ti-6Al-4V). Computer-aided engineering tools, especially software which was used to perform the simulation. Four types of finite element software have been focused during the machining process of titanium alloy (Ti-6Al-4V) such as AdvantEdge, ABAQUS/EXPLICIT, DEFORM, and FORG software. The simulation results of FEM proved an agreement with the experimental data during the machining process of titanium alloy (Ti-6Al-4V). The FEM permits to reduce the cost of manufacturing in terms of prolonging the cutting tool life and saving machining time.",
author = "Ali, {Moaz H.} and Ansari, {M. N.M.} and Khidhir, {Basim A.} and Bashir Mohamed and Oshkour, {A. A.}",
year = "2014",
month = "2",
doi = "10.1007/s40430-013-0084-0",
language = "English",
volume = "36",
pages = "315--324",
journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering",
issn = "1678-5878",
publisher = "Brazilian Society of Mechanical Sciences and Engineering",
number = "2",

}

Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling. / Ali, Moaz H.; Ansari, M. N.M.; Khidhir, Basim A.; Mohamed, Bashir; Oshkour, A. A.

In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 36, No. 2, 02.2014, p. 315-324.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling

AU - Ali, Moaz H.

AU - Ansari, M. N.M.

AU - Khidhir, Basim A.

AU - Mohamed, Bashir

AU - Oshkour, A. A.

PY - 2014/2

Y1 - 2014/2

N2 - Titanium alloy is the most significant material used in the aviation industry because of their properties such as high strength and corrosion resistant. However, it is considered one of the most challenging areas for all industrialists due to their poor machinability. Therefore, machining process needs to be controlled by selecting the optimal cutting conditions to obtain the best machining responses at the same time which is very difficult and involves high cost. Hence, this review paper presents the investigation of an agreement between the simulation results and experimental findings to evaluate the finite element modeling (FEM) for prediction of the machining parameters of titanium alloy (Ti-6Al-4V). Computer-aided engineering tools, especially software which was used to perform the simulation. Four types of finite element software have been focused during the machining process of titanium alloy (Ti-6Al-4V) such as AdvantEdge, ABAQUS/EXPLICIT, DEFORM, and FORG software. The simulation results of FEM proved an agreement with the experimental data during the machining process of titanium alloy (Ti-6Al-4V). The FEM permits to reduce the cost of manufacturing in terms of prolonging the cutting tool life and saving machining time.

AB - Titanium alloy is the most significant material used in the aviation industry because of their properties such as high strength and corrosion resistant. However, it is considered one of the most challenging areas for all industrialists due to their poor machinability. Therefore, machining process needs to be controlled by selecting the optimal cutting conditions to obtain the best machining responses at the same time which is very difficult and involves high cost. Hence, this review paper presents the investigation of an agreement between the simulation results and experimental findings to evaluate the finite element modeling (FEM) for prediction of the machining parameters of titanium alloy (Ti-6Al-4V). Computer-aided engineering tools, especially software which was used to perform the simulation. Four types of finite element software have been focused during the machining process of titanium alloy (Ti-6Al-4V) such as AdvantEdge, ABAQUS/EXPLICIT, DEFORM, and FORG software. The simulation results of FEM proved an agreement with the experimental data during the machining process of titanium alloy (Ti-6Al-4V). The FEM permits to reduce the cost of manufacturing in terms of prolonging the cutting tool life and saving machining time.

UR - http://www.scopus.com/inward/record.url?scp=84898800539&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84898800539&partnerID=8YFLogxK

U2 - 10.1007/s40430-013-0084-0

DO - 10.1007/s40430-013-0084-0

M3 - Article

AN - SCOPUS:84898800539

VL - 36

SP - 315

EP - 324

JO - Journal of the Brazilian Society of Mechanical Sciences and Engineering

JF - Journal of the Brazilian Society of Mechanical Sciences and Engineering

SN - 1678-5878

IS - 2

ER -