Powder material parameters establishment through warm forming route

Md Mujibur Rahman, A. K. Ariffin, S. S.M. Nor, H. Y. Rahman

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

This paper presents the establishment of the properties of powder materials through experimentation at elevated temperature ranging from room temperature (30 °C) to 150 °C. Uniaxial die compaction experiments were conducted to establish the powder properties such as densification, Young's modulus, spring-back, plastic index, elastic index, and plastic hardening coefficient. Shearing experiments were conducted to establish the temperature dependent friction coefficient. Iron powder ASC 100.29, manufactured by Höganäs AB Company was used during the experiment. The results showed that the deformation properties of powder materials especially iron powder are temperature dependent. The values of some properties are increased as the compaction temperature increased and vice versa.

Original languageEnglish
Pages (from-to)264-271
Number of pages8
JournalMaterials and Design
Volume32
Issue number1
DOIs
Publication statusPublished - 01 Jan 2011

Fingerprint

Powders
Iron powder
Compaction
Temperature
Plastics
Experiments
Densification
Shearing
Hardening
Elastic moduli
Friction
Industry

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Rahman, Md Mujibur ; Ariffin, A. K. ; Nor, S. S.M. ; Rahman, H. Y. / Powder material parameters establishment through warm forming route. In: Materials and Design. 2011 ; Vol. 32, No. 1. pp. 264-271.
@article{051cb153c510487a8c8e26f5a82b4f2c,
title = "Powder material parameters establishment through warm forming route",
abstract = "This paper presents the establishment of the properties of powder materials through experimentation at elevated temperature ranging from room temperature (30 °C) to 150 °C. Uniaxial die compaction experiments were conducted to establish the powder properties such as densification, Young's modulus, spring-back, plastic index, elastic index, and plastic hardening coefficient. Shearing experiments were conducted to establish the temperature dependent friction coefficient. Iron powder ASC 100.29, manufactured by H{\"o}gan{\"a}s AB Company was used during the experiment. The results showed that the deformation properties of powder materials especially iron powder are temperature dependent. The values of some properties are increased as the compaction temperature increased and vice versa.",
author = "Rahman, {Md Mujibur} and Ariffin, {A. K.} and Nor, {S. S.M.} and Rahman, {H. Y.}",
year = "2011",
month = "1",
day = "1",
doi = "10.1016/j.matdes.2010.05.058",
language = "English",
volume = "32",
pages = "264--271",
journal = "Materials and Design",
issn = "0261-3069",
publisher = "Elsevier BV",
number = "1",

}

Powder material parameters establishment through warm forming route. / Rahman, Md Mujibur; Ariffin, A. K.; Nor, S. S.M.; Rahman, H. Y.

In: Materials and Design, Vol. 32, No. 1, 01.01.2011, p. 264-271.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Powder material parameters establishment through warm forming route

AU - Rahman, Md Mujibur

AU - Ariffin, A. K.

AU - Nor, S. S.M.

AU - Rahman, H. Y.

PY - 2011/1/1

Y1 - 2011/1/1

N2 - This paper presents the establishment of the properties of powder materials through experimentation at elevated temperature ranging from room temperature (30 °C) to 150 °C. Uniaxial die compaction experiments were conducted to establish the powder properties such as densification, Young's modulus, spring-back, plastic index, elastic index, and plastic hardening coefficient. Shearing experiments were conducted to establish the temperature dependent friction coefficient. Iron powder ASC 100.29, manufactured by Höganäs AB Company was used during the experiment. The results showed that the deformation properties of powder materials especially iron powder are temperature dependent. The values of some properties are increased as the compaction temperature increased and vice versa.

AB - This paper presents the establishment of the properties of powder materials through experimentation at elevated temperature ranging from room temperature (30 °C) to 150 °C. Uniaxial die compaction experiments were conducted to establish the powder properties such as densification, Young's modulus, spring-back, plastic index, elastic index, and plastic hardening coefficient. Shearing experiments were conducted to establish the temperature dependent friction coefficient. Iron powder ASC 100.29, manufactured by Höganäs AB Company was used during the experiment. The results showed that the deformation properties of powder materials especially iron powder are temperature dependent. The values of some properties are increased as the compaction temperature increased and vice versa.

UR - http://www.scopus.com/inward/record.url?scp=77956177641&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77956177641&partnerID=8YFLogxK

U2 - 10.1016/j.matdes.2010.05.058

DO - 10.1016/j.matdes.2010.05.058

M3 - Article

VL - 32

SP - 264

EP - 271

JO - Materials and Design

JF - Materials and Design

SN - 0261-3069

IS - 1

ER -