Modulation techniques for RFID transceiver using software defined radio

Mahammad Abdul Hannan, Muhammad Islam, Salina Abdul Samad, Aini Hussain

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

This paper presents the fundamental concept on the development of a SDR-based RFID simulation model under various modulation techniques. The model efficiently evaluates the performance of multi-array PSK, high data rate QAM and PSAM schemes. The performance of these modulation techniques is evaluated when the system is subjected to a number of users as well as to noise and interference in the channel. AWGN and multipath Rayleigh fading are considered in the channel. The system is analyzed using bit error rate (BER) and signal noise ratio (SNR) for aforesaid modulation techniques and different roll-off factor. The simulation results show a possible solution for future software defined radio in various wireless communication systems. The degradation was also verified with a larger roll-off factor. Additionally, experimental results showed that the PSAM transceiver achieved a high level of data transmission accurately. Two case studies have been conducted to prove the proposed SDR influence on data and image transmission for improving BER performance and image constellation. Finally, a comparison has been made between the proposed and existing SDR systems to analyze and demonstrate the effectiveness of the SDR performance. © ICIC International 2012.
Original languageEnglish
Pages (from-to)6667-6692
Number of pages5997
JournalInternational Journal of Innovative Computing, Information and Control
Publication statusPublished - 01 Oct 2012
Externally publishedYes

Fingerprint

Radio Frequency Identification
Transceivers
Radio frequency identification (RFID)
Modulation
radio
software
Bit error rate
Data communication systems
Software
Data Transmission
Error Rate
Image communication systems
data transmission
Phase shift keying
Quadrature amplitude modulation
Rayleigh fading
Image Transmission
Rayleigh Fading
simulation
Communication systems

All Science Journal Classification (ASJC) codes

  • Building and Construction
  • Energy(all)
  • Mechanical Engineering
  • Management, Monitoring, Policy and Law

Cite this

@article{55b8505a6ba24cee8cdd997e05dba864,
title = "Modulation techniques for RFID transceiver using software defined radio",
abstract = "This paper presents the fundamental concept on the development of a SDR-based RFID simulation model under various modulation techniques. The model efficiently evaluates the performance of multi-array PSK, high data rate QAM and PSAM schemes. The performance of these modulation techniques is evaluated when the system is subjected to a number of users as well as to noise and interference in the channel. AWGN and multipath Rayleigh fading are considered in the channel. The system is analyzed using bit error rate (BER) and signal noise ratio (SNR) for aforesaid modulation techniques and different roll-off factor. The simulation results show a possible solution for future software defined radio in various wireless communication systems. The degradation was also verified with a larger roll-off factor. Additionally, experimental results showed that the PSAM transceiver achieved a high level of data transmission accurately. Two case studies have been conducted to prove the proposed SDR influence on data and image transmission for improving BER performance and image constellation. Finally, a comparison has been made between the proposed and existing SDR systems to analyze and demonstrate the effectiveness of the SDR performance. {\circledC} ICIC International 2012.",
author = "Hannan, {Mahammad Abdul} and Muhammad Islam and Samad, {Salina Abdul} and Aini Hussain",
year = "2012",
month = "10",
day = "1",
language = "English",
pages = "6667--6692",
journal = "International Journal of Innovative Computing, Information and Control",
issn = "1349-4198",
publisher = "IJICIC Editorial Office",

}

Modulation techniques for RFID transceiver using software defined radio. / Hannan, Mahammad Abdul; Islam, Muhammad; Samad, Salina Abdul; Hussain, Aini.

In: International Journal of Innovative Computing, Information and Control, 01.10.2012, p. 6667-6692.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Modulation techniques for RFID transceiver using software defined radio

AU - Hannan, Mahammad Abdul

AU - Islam, Muhammad

AU - Samad, Salina Abdul

AU - Hussain, Aini

PY - 2012/10/1

Y1 - 2012/10/1

N2 - This paper presents the fundamental concept on the development of a SDR-based RFID simulation model under various modulation techniques. The model efficiently evaluates the performance of multi-array PSK, high data rate QAM and PSAM schemes. The performance of these modulation techniques is evaluated when the system is subjected to a number of users as well as to noise and interference in the channel. AWGN and multipath Rayleigh fading are considered in the channel. The system is analyzed using bit error rate (BER) and signal noise ratio (SNR) for aforesaid modulation techniques and different roll-off factor. The simulation results show a possible solution for future software defined radio in various wireless communication systems. The degradation was also verified with a larger roll-off factor. Additionally, experimental results showed that the PSAM transceiver achieved a high level of data transmission accurately. Two case studies have been conducted to prove the proposed SDR influence on data and image transmission for improving BER performance and image constellation. Finally, a comparison has been made between the proposed and existing SDR systems to analyze and demonstrate the effectiveness of the SDR performance. © ICIC International 2012.

AB - This paper presents the fundamental concept on the development of a SDR-based RFID simulation model under various modulation techniques. The model efficiently evaluates the performance of multi-array PSK, high data rate QAM and PSAM schemes. The performance of these modulation techniques is evaluated when the system is subjected to a number of users as well as to noise and interference in the channel. AWGN and multipath Rayleigh fading are considered in the channel. The system is analyzed using bit error rate (BER) and signal noise ratio (SNR) for aforesaid modulation techniques and different roll-off factor. The simulation results show a possible solution for future software defined radio in various wireless communication systems. The degradation was also verified with a larger roll-off factor. Additionally, experimental results showed that the PSAM transceiver achieved a high level of data transmission accurately. Two case studies have been conducted to prove the proposed SDR influence on data and image transmission for improving BER performance and image constellation. Finally, a comparison has been made between the proposed and existing SDR systems to analyze and demonstrate the effectiveness of the SDR performance. © ICIC International 2012.

UR - https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84866010124&origin=inward

UR - https://www.scopus.com/inward/citedby.uri?partnerID=HzOxMe3b&scp=84866010124&origin=inward

M3 - Article

SP - 6667

EP - 6692

JO - International Journal of Innovative Computing, Information and Control

JF - International Journal of Innovative Computing, Information and Control

SN - 1349-4198

ER -