Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software

H. A. Illias, H. R. Yon, A. H A Bakar, H. Mokhlis, G. Chen, P. L. Lewin, Azrul Mohd Ariffin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Measurement of partial discharge (PD) in high voltage equipment is widely used in condition assessment and performance maintenance of the insulation system. One of the methods to evaluate PD data from condition monitoring activities is by analysing PD signals captured from the PD detection equipment. In high voltage power cable, PD pulses originated from defect sites within cable insulation can propagate along the insulation. A better understanding of PD pulse propagation along cable insulation can be attained through simulation work. Therefore, in this paper, the propagation of PD pulses within cable insulation was simulated using finite element analysis (FEA) software and its velocity of propagation was calculated. The result was compared with the theoretical value and simulation results using PSCAD software. The effect of cable insulation parameters on the PD pulse propagation was also studied through the FEA model; these include variation of the permittivity and conductivity of the insulation material.

Original languageEnglish
Title of host publication2013 IEEE Electrical Insulation Conference, EIC 2013
Pages52-56
Number of pages5
DOIs
Publication statusPublished - 2013
Event31st Electrical Insulation Conference, EIC 2013 - Ottawa, ON, Canada
Duration: 02 Jun 201305 Jun 2013

Other

Other31st Electrical Insulation Conference, EIC 2013
CountryCanada
CityOttawa, ON
Period02/06/1305/06/13

Fingerprint

Partial discharges
Insulation
Cables
Finite element method
Electric potential
Condition monitoring
Permittivity
Defects

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Illias, H. A., Yon, H. R., Bakar, A. H. A., Mokhlis, H., Chen, G., Lewin, P. L., & Mohd Ariffin, A. (2013). Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software. In 2013 IEEE Electrical Insulation Conference, EIC 2013 (pp. 52-56). [6554201] https://doi.org/10.1109/EIC.2013.6554201
Illias, H. A. ; Yon, H. R. ; Bakar, A. H A ; Mokhlis, H. ; Chen, G. ; Lewin, P. L. ; Mohd Ariffin, Azrul. / Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software. 2013 IEEE Electrical Insulation Conference, EIC 2013. 2013. pp. 52-56
@inproceedings{4184c01cd6124ba48ed2ee03038cca20,
title = "Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software",
abstract = "Measurement of partial discharge (PD) in high voltage equipment is widely used in condition assessment and performance maintenance of the insulation system. One of the methods to evaluate PD data from condition monitoring activities is by analysing PD signals captured from the PD detection equipment. In high voltage power cable, PD pulses originated from defect sites within cable insulation can propagate along the insulation. A better understanding of PD pulse propagation along cable insulation can be attained through simulation work. Therefore, in this paper, the propagation of PD pulses within cable insulation was simulated using finite element analysis (FEA) software and its velocity of propagation was calculated. The result was compared with the theoretical value and simulation results using PSCAD software. The effect of cable insulation parameters on the PD pulse propagation was also studied through the FEA model; these include variation of the permittivity and conductivity of the insulation material.",
author = "Illias, {H. A.} and Yon, {H. R.} and Bakar, {A. H A} and H. Mokhlis and G. Chen and Lewin, {P. L.} and {Mohd Ariffin}, Azrul",
year = "2013",
doi = "10.1109/EIC.2013.6554201",
language = "English",
isbn = "9781467347389",
pages = "52--56",
booktitle = "2013 IEEE Electrical Insulation Conference, EIC 2013",

}

Illias, HA, Yon, HR, Bakar, AHA, Mokhlis, H, Chen, G, Lewin, PL & Mohd Ariffin, A 2013, Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software. in 2013 IEEE Electrical Insulation Conference, EIC 2013., 6554201, pp. 52-56, 31st Electrical Insulation Conference, EIC 2013, Ottawa, ON, Canada, 02/06/13. https://doi.org/10.1109/EIC.2013.6554201

Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software. / Illias, H. A.; Yon, H. R.; Bakar, A. H A; Mokhlis, H.; Chen, G.; Lewin, P. L.; Mohd Ariffin, Azrul.

2013 IEEE Electrical Insulation Conference, EIC 2013. 2013. p. 52-56 6554201.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software

AU - Illias, H. A.

AU - Yon, H. R.

AU - Bakar, A. H A

AU - Mokhlis, H.

AU - Chen, G.

AU - Lewin, P. L.

AU - Mohd Ariffin, Azrul

PY - 2013

Y1 - 2013

N2 - Measurement of partial discharge (PD) in high voltage equipment is widely used in condition assessment and performance maintenance of the insulation system. One of the methods to evaluate PD data from condition monitoring activities is by analysing PD signals captured from the PD detection equipment. In high voltage power cable, PD pulses originated from defect sites within cable insulation can propagate along the insulation. A better understanding of PD pulse propagation along cable insulation can be attained through simulation work. Therefore, in this paper, the propagation of PD pulses within cable insulation was simulated using finite element analysis (FEA) software and its velocity of propagation was calculated. The result was compared with the theoretical value and simulation results using PSCAD software. The effect of cable insulation parameters on the PD pulse propagation was also studied through the FEA model; these include variation of the permittivity and conductivity of the insulation material.

AB - Measurement of partial discharge (PD) in high voltage equipment is widely used in condition assessment and performance maintenance of the insulation system. One of the methods to evaluate PD data from condition monitoring activities is by analysing PD signals captured from the PD detection equipment. In high voltage power cable, PD pulses originated from defect sites within cable insulation can propagate along the insulation. A better understanding of PD pulse propagation along cable insulation can be attained through simulation work. Therefore, in this paper, the propagation of PD pulses within cable insulation was simulated using finite element analysis (FEA) software and its velocity of propagation was calculated. The result was compared with the theoretical value and simulation results using PSCAD software. The effect of cable insulation parameters on the PD pulse propagation was also studied through the FEA model; these include variation of the permittivity and conductivity of the insulation material.

UR - http://www.scopus.com/inward/record.url?scp=84883802703&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883802703&partnerID=8YFLogxK

U2 - 10.1109/EIC.2013.6554201

DO - 10.1109/EIC.2013.6554201

M3 - Conference contribution

SN - 9781467347389

SP - 52

EP - 56

BT - 2013 IEEE Electrical Insulation Conference, EIC 2013

ER -

Illias HA, Yon HR, Bakar AHA, Mokhlis H, Chen G, Lewin PL et al. Modelling of partial discharge pulses in high voltage cable insulation using finite element analysis software. In 2013 IEEE Electrical Insulation Conference, EIC 2013. 2013. p. 52-56. 6554201 https://doi.org/10.1109/EIC.2013.6554201