MATLAB and VHDL model of real time partial discharge detection using FPGA technology

Emilliano, Chandan Kumar Chakrabarty, Agileswari Ramasamy, Ahmad Basri A. Ghani

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This research involves evaluating the use of FPGA for the detection and counting of partial discharge (PD) signals in underground cables (XLPE cables). PD detection model was designed one using MATLAB and another using VHDL. The pulse signal from the cable was processed and counted using peak detector and FPGA technology. The peak detector placed inside the VHDL program when the program of PD detection model was designed using VHDL program. Then, the model designed was used for testing and validation. Both models are able detect the PD signals and the results obtained are similar.

Original languageEnglish
Title of host publication2011 IEEE Conference on Open Systems, ICOS 2011
Pages395-400
Number of pages6
DOIs
Publication statusPublished - 14 Dec 2011
Event2nd IEEE International Conference on Open Systems, ICOS 2011 - Langkawi, Malaysia
Duration: 25 Sep 201128 Sep 2011

Publication series

Name2011 IEEE Conference on Open Systems, ICOS 2011

Other

Other2nd IEEE International Conference on Open Systems, ICOS 2011
CountryMalaysia
CityLangkawi
Period25/09/1128/09/11

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Hardware and Architecture
  • Software

Cite this

Emilliano, Kumar Chakrabarty, C., Ramasamy, A., & Ghani, A. B. A. (2011). MATLAB and VHDL model of real time partial discharge detection using FPGA technology. In 2011 IEEE Conference on Open Systems, ICOS 2011 (pp. 395-400). [6079262] (2011 IEEE Conference on Open Systems, ICOS 2011). https://doi.org/10.1109/ICOS.2011.6079262