High frequency tan delta measurement method for 132kV transmission underground cables

A. R. Avinash, Chandan Kumar Chakrabarty, Navinesshani Permal

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Tangent Delta is a measurement technique to investigate cables insulation strength. Current techniques utilize Very Low Frequency (VLF) at 0.1 Hz and power frequency at 50 Hz. However, high voltages are required, thus requiring larger space and cost. Proposed method of tangent delta testing utilizes High frequency Low voltage diagnoses. The phase between the current and the voltage is utilized to determine the tangent delta (tan δ). The aim of this study is to develop a low voltage high frequency tangent delta measurement method and test if it can discriminate manufactured 132 kV good conditioned cable sample from defect induced cables with void, scotched and contamination in its insulation. Impurities are clearly discriminated using this method. Comparison of Tangent Delta of cables manufactured simultaneously in good condition and defect induced is performed using High Frequency Tangent Delta method and in 50 Hz conventional method to validate the effectiveness of the measurement technique. The High Frequency AC setup utilizes a small testing environment which can sample small lengths with minimum 1 m length of cable. The small lengths will result in the reduction of total capacitance of the cable but using High Frequency induces high electric stress on XLPE layer thus resulting in measureable dielectric current.

Original languageEnglish
Pages (from-to)903-913
Number of pages11
JournalResearch Journal of Applied Sciences, Engineering and Technology
Volume10
Issue number8
DOIs
Publication statusPublished - 01 Jan 2015

Fingerprint

Underground cables
Cables
Electric potential
Insulation
Defects
Testing
Contamination
Capacitance
Impurities
Costs

All Science Journal Classification (ASJC) codes

  • Computer Science(all)
  • Engineering(all)

Cite this

@article{39e82f7fa1d8427e8dbe48cc84942700,
title = "High frequency tan delta measurement method for 132kV transmission underground cables",
abstract = "Tangent Delta is a measurement technique to investigate cables insulation strength. Current techniques utilize Very Low Frequency (VLF) at 0.1 Hz and power frequency at 50 Hz. However, high voltages are required, thus requiring larger space and cost. Proposed method of tangent delta testing utilizes High frequency Low voltage diagnoses. The phase between the current and the voltage is utilized to determine the tangent delta (tan δ). The aim of this study is to develop a low voltage high frequency tangent delta measurement method and test if it can discriminate manufactured 132 kV good conditioned cable sample from defect induced cables with void, scotched and contamination in its insulation. Impurities are clearly discriminated using this method. Comparison of Tangent Delta of cables manufactured simultaneously in good condition and defect induced is performed using High Frequency Tangent Delta method and in 50 Hz conventional method to validate the effectiveness of the measurement technique. The High Frequency AC setup utilizes a small testing environment which can sample small lengths with minimum 1 m length of cable. The small lengths will result in the reduction of total capacitance of the cable but using High Frequency induces high electric stress on XLPE layer thus resulting in measureable dielectric current.",
author = "Avinash, {A. R.} and Chakrabarty, {Chandan Kumar} and Navinesshani Permal",
year = "2015",
month = "1",
day = "1",
doi = "10.19026/rjaset.10.2446",
language = "English",
volume = "10",
pages = "903--913",
journal = "Research Journal of Applied Sciences, Engineering and Technology",
issn = "2040-7459",
publisher = "Maxwell Scientific Publications",
number = "8",

}

High frequency tan delta measurement method for 132kV transmission underground cables. / Avinash, A. R.; Chakrabarty, Chandan Kumar; Permal, Navinesshani.

In: Research Journal of Applied Sciences, Engineering and Technology, Vol. 10, No. 8, 01.01.2015, p. 903-913.

Research output: Contribution to journalArticle

TY - JOUR

T1 - High frequency tan delta measurement method for 132kV transmission underground cables

AU - Avinash, A. R.

AU - Chakrabarty, Chandan Kumar

AU - Permal, Navinesshani

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Tangent Delta is a measurement technique to investigate cables insulation strength. Current techniques utilize Very Low Frequency (VLF) at 0.1 Hz and power frequency at 50 Hz. However, high voltages are required, thus requiring larger space and cost. Proposed method of tangent delta testing utilizes High frequency Low voltage diagnoses. The phase between the current and the voltage is utilized to determine the tangent delta (tan δ). The aim of this study is to develop a low voltage high frequency tangent delta measurement method and test if it can discriminate manufactured 132 kV good conditioned cable sample from defect induced cables with void, scotched and contamination in its insulation. Impurities are clearly discriminated using this method. Comparison of Tangent Delta of cables manufactured simultaneously in good condition and defect induced is performed using High Frequency Tangent Delta method and in 50 Hz conventional method to validate the effectiveness of the measurement technique. The High Frequency AC setup utilizes a small testing environment which can sample small lengths with minimum 1 m length of cable. The small lengths will result in the reduction of total capacitance of the cable but using High Frequency induces high electric stress on XLPE layer thus resulting in measureable dielectric current.

AB - Tangent Delta is a measurement technique to investigate cables insulation strength. Current techniques utilize Very Low Frequency (VLF) at 0.1 Hz and power frequency at 50 Hz. However, high voltages are required, thus requiring larger space and cost. Proposed method of tangent delta testing utilizes High frequency Low voltage diagnoses. The phase between the current and the voltage is utilized to determine the tangent delta (tan δ). The aim of this study is to develop a low voltage high frequency tangent delta measurement method and test if it can discriminate manufactured 132 kV good conditioned cable sample from defect induced cables with void, scotched and contamination in its insulation. Impurities are clearly discriminated using this method. Comparison of Tangent Delta of cables manufactured simultaneously in good condition and defect induced is performed using High Frequency Tangent Delta method and in 50 Hz conventional method to validate the effectiveness of the measurement technique. The High Frequency AC setup utilizes a small testing environment which can sample small lengths with minimum 1 m length of cable. The small lengths will result in the reduction of total capacitance of the cable but using High Frequency induces high electric stress on XLPE layer thus resulting in measureable dielectric current.

UR - http://www.scopus.com/inward/record.url?scp=84939216702&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84939216702&partnerID=8YFLogxK

U2 - 10.19026/rjaset.10.2446

DO - 10.19026/rjaset.10.2446

M3 - Article

AN - SCOPUS:84939216702

VL - 10

SP - 903

EP - 913

JO - Research Journal of Applied Sciences, Engineering and Technology

JF - Research Journal of Applied Sciences, Engineering and Technology

SN - 2040-7459

IS - 8

ER -