Heat-modeling of microwave assisted epoxidation of palm acid oil

Saifuddin M. Nomanbhay, L. Wei Zhan, K. Xin Ning

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

While microwave chemistry could well be the most convenient, rapid and energy-saving way to initiate a chemical reaction, the issues of thermal versus microwave specific effect remain unaddressed. Approach: A three-dimensional Finite Element Model (FEM) was developed to predict temperature profile during the enzymatic epoxidation of palm acid oil using microwave heating. Three-dimensional partial differential equations are formulated for the electromagnetic field and heat and mass transfer processes. The temperature profile of the FEM generated from the commercial software (ANSYS Emag) was verified using experimental data from microwave oven heated samples containing palm acid oil and reactants in cylindrical bottles and has compared favorably with real time data. An Infra Red thermometer was used to measure temperature of the reactants during the real time experiment to ensure less contact with the reaction vessel. Results: Apart from ascertaining the temperature profile of the epoxidation process in the cylindrical bottle, the heat-modeling of this reaction can predict the Energy required during the reaction and provide insights to non-thermal microwave effects. It has shown the possibility of Microwave Non-Thermal Effects and Microwave Selectivity in Substrate Specificity. The energy used by the microwave irradiated reaction is by far much lesser than the energy used in conventional heating. This study has also improved the epoxidation process of Palm Acid Oil by incorporating enzyme as a catalyst and using microwave heating. Epoxidation can be done rapidly and at a lower level of activation energy of 27.767 kJ mol-1. It is a green process with increased efficiency as it reduced a typically 5-hour reaction to less than an hour. Conclusion: In this study, a quantitative view of a microwave assisted process of enzymatic epoxidation has been established. We have successfully developed and experimentally validated a 3D electromagnetic heat transfer model. This model can thus be used to predict the energy of the epoxidation and other future microwave reactions. the study also have shown the existence of microwave non-thermal effects and microwave selectivity in substrate specificity.

Original languageEnglish
Pages (from-to)217-229
Number of pages13
JournalAmerican Journal of Applied Sciences
Volume8
Issue number3
DOIs
Publication statusPublished - 06 Apr 2011

Fingerprint

Epoxidation
Oils
Microwaves
Acids
Microwave heating
Bottles
Hot Temperature
Heat transfer
Microwave ovens
Temperature
Thermometers
Substrates
Electromagnetic fields
Partial differential equations
Chemical reactions
Energy conservation
Mass transfer
Activation energy
Infrared radiation
Heating

All Science Journal Classification (ASJC) codes

  • General

Cite this

@article{2ed7bc5e71c64005b478739887c71d4a,
title = "Heat-modeling of microwave assisted epoxidation of palm acid oil",
abstract = "While microwave chemistry could well be the most convenient, rapid and energy-saving way to initiate a chemical reaction, the issues of thermal versus microwave specific effect remain unaddressed. Approach: A three-dimensional Finite Element Model (FEM) was developed to predict temperature profile during the enzymatic epoxidation of palm acid oil using microwave heating. Three-dimensional partial differential equations are formulated for the electromagnetic field and heat and mass transfer processes. The temperature profile of the FEM generated from the commercial software (ANSYS Emag) was verified using experimental data from microwave oven heated samples containing palm acid oil and reactants in cylindrical bottles and has compared favorably with real time data. An Infra Red thermometer was used to measure temperature of the reactants during the real time experiment to ensure less contact with the reaction vessel. Results: Apart from ascertaining the temperature profile of the epoxidation process in the cylindrical bottle, the heat-modeling of this reaction can predict the Energy required during the reaction and provide insights to non-thermal microwave effects. It has shown the possibility of Microwave Non-Thermal Effects and Microwave Selectivity in Substrate Specificity. The energy used by the microwave irradiated reaction is by far much lesser than the energy used in conventional heating. This study has also improved the epoxidation process of Palm Acid Oil by incorporating enzyme as a catalyst and using microwave heating. Epoxidation can be done rapidly and at a lower level of activation energy of 27.767 kJ mol-1. It is a green process with increased efficiency as it reduced a typically 5-hour reaction to less than an hour. Conclusion: In this study, a quantitative view of a microwave assisted process of enzymatic epoxidation has been established. We have successfully developed and experimentally validated a 3D electromagnetic heat transfer model. This model can thus be used to predict the energy of the epoxidation and other future microwave reactions. the study also have shown the existence of microwave non-thermal effects and microwave selectivity in substrate specificity.",
author = "{M. Nomanbhay}, Saifuddin and Zhan, {L. Wei} and Ning, {K. Xin}",
year = "2011",
month = "4",
day = "6",
doi = "10.3844/ajassp.2011.217.229",
language = "English",
volume = "8",
pages = "217--229",
journal = "American Journal of Applied Sciences",
issn = "1546-9239",
publisher = "Science Publications",
number = "3",

}

Heat-modeling of microwave assisted epoxidation of palm acid oil. / M. Nomanbhay, Saifuddin; Zhan, L. Wei; Ning, K. Xin.

In: American Journal of Applied Sciences, Vol. 8, No. 3, 06.04.2011, p. 217-229.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Heat-modeling of microwave assisted epoxidation of palm acid oil

AU - M. Nomanbhay, Saifuddin

AU - Zhan, L. Wei

AU - Ning, K. Xin

PY - 2011/4/6

Y1 - 2011/4/6

N2 - While microwave chemistry could well be the most convenient, rapid and energy-saving way to initiate a chemical reaction, the issues of thermal versus microwave specific effect remain unaddressed. Approach: A three-dimensional Finite Element Model (FEM) was developed to predict temperature profile during the enzymatic epoxidation of palm acid oil using microwave heating. Three-dimensional partial differential equations are formulated for the electromagnetic field and heat and mass transfer processes. The temperature profile of the FEM generated from the commercial software (ANSYS Emag) was verified using experimental data from microwave oven heated samples containing palm acid oil and reactants in cylindrical bottles and has compared favorably with real time data. An Infra Red thermometer was used to measure temperature of the reactants during the real time experiment to ensure less contact with the reaction vessel. Results: Apart from ascertaining the temperature profile of the epoxidation process in the cylindrical bottle, the heat-modeling of this reaction can predict the Energy required during the reaction and provide insights to non-thermal microwave effects. It has shown the possibility of Microwave Non-Thermal Effects and Microwave Selectivity in Substrate Specificity. The energy used by the microwave irradiated reaction is by far much lesser than the energy used in conventional heating. This study has also improved the epoxidation process of Palm Acid Oil by incorporating enzyme as a catalyst and using microwave heating. Epoxidation can be done rapidly and at a lower level of activation energy of 27.767 kJ mol-1. It is a green process with increased efficiency as it reduced a typically 5-hour reaction to less than an hour. Conclusion: In this study, a quantitative view of a microwave assisted process of enzymatic epoxidation has been established. We have successfully developed and experimentally validated a 3D electromagnetic heat transfer model. This model can thus be used to predict the energy of the epoxidation and other future microwave reactions. the study also have shown the existence of microwave non-thermal effects and microwave selectivity in substrate specificity.

AB - While microwave chemistry could well be the most convenient, rapid and energy-saving way to initiate a chemical reaction, the issues of thermal versus microwave specific effect remain unaddressed. Approach: A three-dimensional Finite Element Model (FEM) was developed to predict temperature profile during the enzymatic epoxidation of palm acid oil using microwave heating. Three-dimensional partial differential equations are formulated for the electromagnetic field and heat and mass transfer processes. The temperature profile of the FEM generated from the commercial software (ANSYS Emag) was verified using experimental data from microwave oven heated samples containing palm acid oil and reactants in cylindrical bottles and has compared favorably with real time data. An Infra Red thermometer was used to measure temperature of the reactants during the real time experiment to ensure less contact with the reaction vessel. Results: Apart from ascertaining the temperature profile of the epoxidation process in the cylindrical bottle, the heat-modeling of this reaction can predict the Energy required during the reaction and provide insights to non-thermal microwave effects. It has shown the possibility of Microwave Non-Thermal Effects and Microwave Selectivity in Substrate Specificity. The energy used by the microwave irradiated reaction is by far much lesser than the energy used in conventional heating. This study has also improved the epoxidation process of Palm Acid Oil by incorporating enzyme as a catalyst and using microwave heating. Epoxidation can be done rapidly and at a lower level of activation energy of 27.767 kJ mol-1. It is a green process with increased efficiency as it reduced a typically 5-hour reaction to less than an hour. Conclusion: In this study, a quantitative view of a microwave assisted process of enzymatic epoxidation has been established. We have successfully developed and experimentally validated a 3D electromagnetic heat transfer model. This model can thus be used to predict the energy of the epoxidation and other future microwave reactions. the study also have shown the existence of microwave non-thermal effects and microwave selectivity in substrate specificity.

UR - http://www.scopus.com/inward/record.url?scp=79953290430&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79953290430&partnerID=8YFLogxK

U2 - 10.3844/ajassp.2011.217.229

DO - 10.3844/ajassp.2011.217.229

M3 - Article

VL - 8

SP - 217

EP - 229

JO - American Journal of Applied Sciences

JF - American Journal of Applied Sciences

SN - 1546-9239

IS - 3

ER -