Fuzzy logic overcurrent relay using sugeno technique

Omar Sami Thiab, Sami Thiab Abdulrazaaq, Bin Zainal Abidin Izham, Aidil Azwin Zainul Abidin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The overcurrent relay is the simplest and most economical type of protective relay, the relay is designed to operate when more than a predetermined amount of current flows into a particular portion of the power system. Time delay between relay's main zone and it's backup will keep the selectivity of the system, The inverse definite minimum time relay will calculate the time delay inversely proportional to the fault current level. This technique has some weaknesses where the time delay provided for a given case maybe too high and if the fault is not isolated immediately then damage could be caused to other connected equipment in the power system. This paper presents the fuzzy logic relay using Sugeno technique to determine the time delay, and using of symmetrical components application in detecting fault type, also it presents a comparison between times calculated by other techniques.

Original languageEnglish
Title of host publicationMicro/Nano Science and Engineering
PublisherTrans Tech Publications
Pages559-563
Number of pages5
ISBN (Print)9783038350866
DOIs
Publication statusPublished - 01 Jan 2014
EventJoint International Conference on Nanoscience, Engineering and Management, BOND21 - Penang, Malaysia
Duration: 19 Aug 201321 Aug 2013

Publication series

NameAdvanced Materials Research
Volume925
ISSN (Print)1022-6680

Other

OtherJoint International Conference on Nanoscience, Engineering and Management, BOND21
CountryMalaysia
CityPenang
Period19/08/1321/08/13

Fingerprint

Fuzzy logic
Time delay
Relay protection
Electric fault currents

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Thiab, O. S., Abdulrazaaq, S. T., Izham, B. Z. A., & Zainul Abidin, A. A. (2014). Fuzzy logic overcurrent relay using sugeno technique. In Micro/Nano Science and Engineering (pp. 559-563). (Advanced Materials Research; Vol. 925). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/AMR.925.559
Thiab, Omar Sami ; Abdulrazaaq, Sami Thiab ; Izham, Bin Zainal Abidin ; Zainul Abidin, Aidil Azwin. / Fuzzy logic overcurrent relay using sugeno technique. Micro/Nano Science and Engineering. Trans Tech Publications, 2014. pp. 559-563 (Advanced Materials Research).
@inproceedings{8858cfd2fb69420aab4e491716ad2d88,
title = "Fuzzy logic overcurrent relay using sugeno technique",
abstract = "The overcurrent relay is the simplest and most economical type of protective relay, the relay is designed to operate when more than a predetermined amount of current flows into a particular portion of the power system. Time delay between relay's main zone and it's backup will keep the selectivity of the system, The inverse definite minimum time relay will calculate the time delay inversely proportional to the fault current level. This technique has some weaknesses where the time delay provided for a given case maybe too high and if the fault is not isolated immediately then damage could be caused to other connected equipment in the power system. This paper presents the fuzzy logic relay using Sugeno technique to determine the time delay, and using of symmetrical components application in detecting fault type, also it presents a comparison between times calculated by other techniques.",
author = "Thiab, {Omar Sami} and Abdulrazaaq, {Sami Thiab} and Izham, {Bin Zainal Abidin} and {Zainul Abidin}, {Aidil Azwin}",
year = "2014",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/AMR.925.559",
language = "English",
isbn = "9783038350866",
series = "Advanced Materials Research",
publisher = "Trans Tech Publications",
pages = "559--563",
booktitle = "Micro/Nano Science and Engineering",
address = "Germany",

}

Thiab, OS, Abdulrazaaq, ST, Izham, BZA & Zainul Abidin, AA 2014, Fuzzy logic overcurrent relay using sugeno technique. in Micro/Nano Science and Engineering. Advanced Materials Research, vol. 925, Trans Tech Publications, pp. 559-563, Joint International Conference on Nanoscience, Engineering and Management, BOND21, Penang, Malaysia, 19/08/13. https://doi.org/10.4028/www.scientific.net/AMR.925.559

Fuzzy logic overcurrent relay using sugeno technique. / Thiab, Omar Sami; Abdulrazaaq, Sami Thiab; Izham, Bin Zainal Abidin; Zainul Abidin, Aidil Azwin.

Micro/Nano Science and Engineering. Trans Tech Publications, 2014. p. 559-563 (Advanced Materials Research; Vol. 925).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Fuzzy logic overcurrent relay using sugeno technique

AU - Thiab, Omar Sami

AU - Abdulrazaaq, Sami Thiab

AU - Izham, Bin Zainal Abidin

AU - Zainul Abidin, Aidil Azwin

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The overcurrent relay is the simplest and most economical type of protective relay, the relay is designed to operate when more than a predetermined amount of current flows into a particular portion of the power system. Time delay between relay's main zone and it's backup will keep the selectivity of the system, The inverse definite minimum time relay will calculate the time delay inversely proportional to the fault current level. This technique has some weaknesses where the time delay provided for a given case maybe too high and if the fault is not isolated immediately then damage could be caused to other connected equipment in the power system. This paper presents the fuzzy logic relay using Sugeno technique to determine the time delay, and using of symmetrical components application in detecting fault type, also it presents a comparison between times calculated by other techniques.

AB - The overcurrent relay is the simplest and most economical type of protective relay, the relay is designed to operate when more than a predetermined amount of current flows into a particular portion of the power system. Time delay between relay's main zone and it's backup will keep the selectivity of the system, The inverse definite minimum time relay will calculate the time delay inversely proportional to the fault current level. This technique has some weaknesses where the time delay provided for a given case maybe too high and if the fault is not isolated immediately then damage could be caused to other connected equipment in the power system. This paper presents the fuzzy logic relay using Sugeno technique to determine the time delay, and using of symmetrical components application in detecting fault type, also it presents a comparison between times calculated by other techniques.

UR - http://www.scopus.com/inward/record.url?scp=84901720693&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901720693&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.925.559

DO - 10.4028/www.scientific.net/AMR.925.559

M3 - Conference contribution

SN - 9783038350866

T3 - Advanced Materials Research

SP - 559

EP - 563

BT - Micro/Nano Science and Engineering

PB - Trans Tech Publications

ER -

Thiab OS, Abdulrazaaq ST, Izham BZA, Zainul Abidin AA. Fuzzy logic overcurrent relay using sugeno technique. In Micro/Nano Science and Engineering. Trans Tech Publications. 2014. p. 559-563. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.925.559