Evaluation of reference signal estimation techniques for the control of shunt active power filter

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This paper presents the implementations of a new control algorithm for a three-phase shunt active power filter to regulate load terminal voltage, eliminate harmonics, and improve the power factor in systems with an uncontrolled rectifier and an AC controller as the non-linear loads. Different methods are used to control the active power filters. The reference current to be detected from the load current and processed by the active power filter controller is obtained from two different control algorithms, namely the Instantaneous Reactive Power Theory (PQ Theory) and Synchronous Reference Frame Theory (SRF Theory). The system is modeled and simulated using MATLAB/Simulink simulation package with a shunt active power filter to compensate for the harmonics current injected by the loads. It is then interfaced and verified using a Real-Time Digital Signal Processor DS1104 accompanied by an application (dSPACE) that is employed to view the simulation results and control the parameters of the simulation.

Original languageEnglish
Title of host publicationICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment
Subtitle of host publicationAdvancement Towards Global Sustainability
Pages290-293
Number of pages4
DOIs
Publication statusPublished - 2009
Event2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009 - Malacca, Malaysia
Duration: 07 Dec 200908 Dec 2009

Other

Other2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009
CountryMalaysia
CityMalacca
Period07/12/0908/12/09

Fingerprint

Controllers
Digital signal processors
Reactive power
MATLAB
Electric potential

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Environmental Engineering

Cite this

Atan, N., & Yunus, B. (2009). Evaluation of reference signal estimation techniques for the control of shunt active power filter. In ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability (pp. 290-293). [5398631] https://doi.org/10.1109/ICEENVIRON.2009.5398631
Atan, Norani ; Yunus, Bahisham. / Evaluation of reference signal estimation techniques for the control of shunt active power filter. ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability. 2009. pp. 290-293
@inproceedings{978ed49e3ea14a77915e2fbf3796dd40,
title = "Evaluation of reference signal estimation techniques for the control of shunt active power filter",
abstract = "This paper presents the implementations of a new control algorithm for a three-phase shunt active power filter to regulate load terminal voltage, eliminate harmonics, and improve the power factor in systems with an uncontrolled rectifier and an AC controller as the non-linear loads. Different methods are used to control the active power filters. The reference current to be detected from the load current and processed by the active power filter controller is obtained from two different control algorithms, namely the Instantaneous Reactive Power Theory (PQ Theory) and Synchronous Reference Frame Theory (SRF Theory). The system is modeled and simulated using MATLAB/Simulink simulation package with a shunt active power filter to compensate for the harmonics current injected by the loads. It is then interfaced and verified using a Real-Time Digital Signal Processor DS1104 accompanied by an application (dSPACE) that is employed to view the simulation results and control the parameters of the simulation.",
author = "Norani Atan and Bahisham Yunus",
year = "2009",
doi = "10.1109/ICEENVIRON.2009.5398631",
language = "English",
isbn = "9781424451456",
pages = "290--293",
booktitle = "ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment",

}

Atan, N & Yunus, B 2009, Evaluation of reference signal estimation techniques for the control of shunt active power filter. in ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability., 5398631, pp. 290-293, 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009, Malacca, Malaysia, 07/12/09. https://doi.org/10.1109/ICEENVIRON.2009.5398631

Evaluation of reference signal estimation techniques for the control of shunt active power filter. / Atan, Norani; Yunus, Bahisham.

ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability. 2009. p. 290-293 5398631.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Evaluation of reference signal estimation techniques for the control of shunt active power filter

AU - Atan, Norani

AU - Yunus, Bahisham

PY - 2009

Y1 - 2009

N2 - This paper presents the implementations of a new control algorithm for a three-phase shunt active power filter to regulate load terminal voltage, eliminate harmonics, and improve the power factor in systems with an uncontrolled rectifier and an AC controller as the non-linear loads. Different methods are used to control the active power filters. The reference current to be detected from the load current and processed by the active power filter controller is obtained from two different control algorithms, namely the Instantaneous Reactive Power Theory (PQ Theory) and Synchronous Reference Frame Theory (SRF Theory). The system is modeled and simulated using MATLAB/Simulink simulation package with a shunt active power filter to compensate for the harmonics current injected by the loads. It is then interfaced and verified using a Real-Time Digital Signal Processor DS1104 accompanied by an application (dSPACE) that is employed to view the simulation results and control the parameters of the simulation.

AB - This paper presents the implementations of a new control algorithm for a three-phase shunt active power filter to regulate load terminal voltage, eliminate harmonics, and improve the power factor in systems with an uncontrolled rectifier and an AC controller as the non-linear loads. Different methods are used to control the active power filters. The reference current to be detected from the load current and processed by the active power filter controller is obtained from two different control algorithms, namely the Instantaneous Reactive Power Theory (PQ Theory) and Synchronous Reference Frame Theory (SRF Theory). The system is modeled and simulated using MATLAB/Simulink simulation package with a shunt active power filter to compensate for the harmonics current injected by the loads. It is then interfaced and verified using a Real-Time Digital Signal Processor DS1104 accompanied by an application (dSPACE) that is employed to view the simulation results and control the parameters of the simulation.

UR - http://www.scopus.com/inward/record.url?scp=77949581762&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77949581762&partnerID=8YFLogxK

U2 - 10.1109/ICEENVIRON.2009.5398631

DO - 10.1109/ICEENVIRON.2009.5398631

M3 - Conference contribution

SN - 9781424451456

SP - 290

EP - 293

BT - ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment

ER -

Atan N, Yunus B. Evaluation of reference signal estimation techniques for the control of shunt active power filter. In ICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability. 2009. p. 290-293. 5398631 https://doi.org/10.1109/ICEENVIRON.2009.5398631