Enhancement of piezoelectric energy harvester power density using natural rubber

Linasuriani Muhamad, Hanim Salleh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Development of an energy harvesting system has become crucial due to the advancement of electronic devices. Vibration based Energy Harvesting has received growing attention over the last decade. Lead Zirconate Titanate (PZT) sheet used as the active material of the energy harvester. However it has limited power density and it is rather brittle. Thus, the purpose of this work is to enhance the PZT energy harvester power density using natural rubber. The natural rubber addition is in the foam of specific latex as Medium Rubber Latex. The PZT was dipped in the latex to form 1 to 4 layers and shaked at acceleration of 0.25g and 1g. It was found that the percent voltage increase was in between 1.4% to 18% at natural frequency of 55 to 60Hz. Also, the power density was increased in between 10.7% to 38%.

Original languageEnglish
Title of host publicationISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies
EditorsMahamod Ismail, Nordin Ramli
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages51-55
Number of pages5
ISBN (Electronic)9781479959822
DOIs
Publication statusPublished - 02 Sep 2015
Event2nd IEEE International Symposium on Telecommunication Technologies, ISTT 2014 - Langkawi, Malaysia
Duration: 24 Nov 201426 Nov 2014

Publication series

NameISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies

Other

Other2nd IEEE International Symposium on Telecommunication Technologies, ISTT 2014
CountryMalaysia
CityLangkawi
Period24/11/1426/11/14

Fingerprint

Harvesters
Latexes
Rubber
Energy harvesting
Rubber additions
Vibrations (mechanical)
Foams
Natural frequencies
Lead
Electric potential

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications

Cite this

Muhamad, L., & Salleh, H. (2015). Enhancement of piezoelectric energy harvester power density using natural rubber. In M. Ismail, & N. Ramli (Eds.), ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies (pp. 51-55). [7238175] (ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISTT.2014.7238175
Muhamad, Linasuriani ; Salleh, Hanim. / Enhancement of piezoelectric energy harvester power density using natural rubber. ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies. editor / Mahamod Ismail ; Nordin Ramli. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 51-55 (ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies).
@inproceedings{fd6fec9370324f76875ae217b99c7fdc,
title = "Enhancement of piezoelectric energy harvester power density using natural rubber",
abstract = "Development of an energy harvesting system has become crucial due to the advancement of electronic devices. Vibration based Energy Harvesting has received growing attention over the last decade. Lead Zirconate Titanate (PZT) sheet used as the active material of the energy harvester. However it has limited power density and it is rather brittle. Thus, the purpose of this work is to enhance the PZT energy harvester power density using natural rubber. The natural rubber addition is in the foam of specific latex as Medium Rubber Latex. The PZT was dipped in the latex to form 1 to 4 layers and shaked at acceleration of 0.25g and 1g. It was found that the percent voltage increase was in between 1.4{\%} to 18{\%} at natural frequency of 55 to 60Hz. Also, the power density was increased in between 10.7{\%} to 38{\%}.",
author = "Linasuriani Muhamad and Hanim Salleh",
year = "2015",
month = "9",
day = "2",
doi = "10.1109/ISTT.2014.7238175",
language = "English",
series = "ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "51--55",
editor = "Mahamod Ismail and Nordin Ramli",
booktitle = "ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies",
address = "United States",

}

Muhamad, L & Salleh, H 2015, Enhancement of piezoelectric energy harvester power density using natural rubber. in M Ismail & N Ramli (eds), ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies., 7238175, ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies, Institute of Electrical and Electronics Engineers Inc., pp. 51-55, 2nd IEEE International Symposium on Telecommunication Technologies, ISTT 2014, Langkawi, Malaysia, 24/11/14. https://doi.org/10.1109/ISTT.2014.7238175

Enhancement of piezoelectric energy harvester power density using natural rubber. / Muhamad, Linasuriani; Salleh, Hanim.

ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies. ed. / Mahamod Ismail; Nordin Ramli. Institute of Electrical and Electronics Engineers Inc., 2015. p. 51-55 7238175 (ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Enhancement of piezoelectric energy harvester power density using natural rubber

AU - Muhamad, Linasuriani

AU - Salleh, Hanim

PY - 2015/9/2

Y1 - 2015/9/2

N2 - Development of an energy harvesting system has become crucial due to the advancement of electronic devices. Vibration based Energy Harvesting has received growing attention over the last decade. Lead Zirconate Titanate (PZT) sheet used as the active material of the energy harvester. However it has limited power density and it is rather brittle. Thus, the purpose of this work is to enhance the PZT energy harvester power density using natural rubber. The natural rubber addition is in the foam of specific latex as Medium Rubber Latex. The PZT was dipped in the latex to form 1 to 4 layers and shaked at acceleration of 0.25g and 1g. It was found that the percent voltage increase was in between 1.4% to 18% at natural frequency of 55 to 60Hz. Also, the power density was increased in between 10.7% to 38%.

AB - Development of an energy harvesting system has become crucial due to the advancement of electronic devices. Vibration based Energy Harvesting has received growing attention over the last decade. Lead Zirconate Titanate (PZT) sheet used as the active material of the energy harvester. However it has limited power density and it is rather brittle. Thus, the purpose of this work is to enhance the PZT energy harvester power density using natural rubber. The natural rubber addition is in the foam of specific latex as Medium Rubber Latex. The PZT was dipped in the latex to form 1 to 4 layers and shaked at acceleration of 0.25g and 1g. It was found that the percent voltage increase was in between 1.4% to 18% at natural frequency of 55 to 60Hz. Also, the power density was increased in between 10.7% to 38%.

UR - http://www.scopus.com/inward/record.url?scp=84946551930&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946551930&partnerID=8YFLogxK

U2 - 10.1109/ISTT.2014.7238175

DO - 10.1109/ISTT.2014.7238175

M3 - Conference contribution

T3 - ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies

SP - 51

EP - 55

BT - ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies

A2 - Ismail, Mahamod

A2 - Ramli, Nordin

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Muhamad L, Salleh H. Enhancement of piezoelectric energy harvester power density using natural rubber. In Ismail M, Ramli N, editors, ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies. Institute of Electrical and Electronics Engineers Inc. 2015. p. 51-55. 7238175. (ISTT 2014 - 2014 IEEE 2nd International Symposium on Telecommunication Technologies). https://doi.org/10.1109/ISTT.2014.7238175