Development of solar powered water treatment device (SWAD) prototype

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Water is the most essential element for life, there are still some remote areas in Malaysia where clean freshwater is not accessible, this problem had troubled the locals for decades. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The pumps used for the device will obtain the energy from the solar panel to pump water into the filter. For this project, the device is being tested at the UNITEN lake. The main objective of development solar powered treatment device prototyope (SWAD) is to improve the water quality by selecting a suitable water filter while the device is supported by a stable structure. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. The structure of the device is made of combination aluminium which is light weight, sturdy and not reactive to water. The solar panel that has been selected is rated at 250W and it is sufficient to power four pumps rated at 30W.

Original languageEnglish
Title of host publication5th International Conference on Green Design and Manufacture, IConGDM 2019
EditorsShayfull Zamree Bin Abd. Rahim, Mohd Mustafa Al-Bakri Bin Abdullah
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735418714
DOIs
Publication statusPublished - 30 Jul 2019
Event5th International Conference on Green Design and Manufacture 2019, IConGDM 2019 - Kota Bandung, Jawa Barat, Indonesia
Duration: 29 Apr 201930 Apr 2019

Publication series

NameAIP Conference Proceedings
Volume2129
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference5th International Conference on Green Design and Manufacture 2019, IConGDM 2019
CountryIndonesia
CityKota Bandung, Jawa Barat
Period29/04/1930/04/19

Fingerprint

water filters
water treatment
prototypes
pumps
solar collectors
filter
lakes
pump
water
Malaysia
body water
aluminum
computer aided design
filters
lake
water quality
energy
floating
testing
simulation

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

Cite this

Ismail, I. N., Khean, F. F., Zawawi, M. H., Zahari, N. M., Abidin, S. Z., Yusairah, W. N., ... Abd. Rahman, M. S. (2019). Development of solar powered water treatment device (SWAD) prototype. In S. Z. B. A. Rahim, & M. M. A-B. B. Abdullah (Eds.), 5th International Conference on Green Design and Manufacture, IConGDM 2019 [020019] (AIP Conference Proceedings; Vol. 2129). American Institute of Physics Inc.. https://doi.org/10.1063/1.5118027
Ismail, Iszmir Nazmi ; Khean, Foo Fang ; Zawawi, Mohd Hafiz ; Zahari, N. M. ; Abidin, S. Z. ; Yusairah, W. N. ; Mahmood Zuhdi, Ahmad Wafi ; Mohd Roslan, Mohd Eqwan ; Mohamed, Hassan ; Ramli, Mohd Zakwan ; Mansor, Mohd Helmi ; Adria Syaifoel, Fevilia Nurnadia ; Zakaria, A. A. ; Isa, Mohd Rashdan ; Mohamad, Daud ; Jaafar, M. F. ; Rahmat, Nur Azzammudin ; Abd. Rahman, Muhamad Safwan. / Development of solar powered water treatment device (SWAD) prototype. 5th International Conference on Green Design and Manufacture, IConGDM 2019. editor / Shayfull Zamree Bin Abd. Rahim ; Mohd Mustafa Al-Bakri Bin Abdullah. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).
@inproceedings{9afa76b962f443beb1dfdab983a580f5,
title = "Development of solar powered water treatment device (SWAD) prototype",
abstract = "Water is the most essential element for life, there are still some remote areas in Malaysia where clean freshwater is not accessible, this problem had troubled the locals for decades. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The pumps used for the device will obtain the energy from the solar panel to pump water into the filter. For this project, the device is being tested at the UNITEN lake. The main objective of development solar powered treatment device prototyope (SWAD) is to improve the water quality by selecting a suitable water filter while the device is supported by a stable structure. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. The structure of the device is made of combination aluminium which is light weight, sturdy and not reactive to water. The solar panel that has been selected is rated at 250W and it is sufficient to power four pumps rated at 30W.",
author = "Ismail, {Iszmir Nazmi} and Khean, {Foo Fang} and Zawawi, {Mohd Hafiz} and Zahari, {N. M.} and Abidin, {S. Z.} and Yusairah, {W. N.} and {Mahmood Zuhdi}, {Ahmad Wafi} and {Mohd Roslan}, {Mohd Eqwan} and Hassan Mohamed and Ramli, {Mohd Zakwan} and Mansor, {Mohd Helmi} and {Adria Syaifoel}, {Fevilia Nurnadia} and Zakaria, {A. A.} and Isa, {Mohd Rashdan} and Daud Mohamad and Jaafar, {M. F.} and Rahmat, {Nur Azzammudin} and {Abd. Rahman}, {Muhamad Safwan}",
year = "2019",
month = "7",
day = "30",
doi = "10.1063/1.5118027",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Rahim, {Shayfull Zamree Bin Abd.} and Abdullah, {Mohd Mustafa Al-Bakri Bin}",
booktitle = "5th International Conference on Green Design and Manufacture, IConGDM 2019",

}

Ismail, IN, Khean, FF, Zawawi, MH, Zahari, NM, Abidin, SZ, Yusairah, WN, Mahmood Zuhdi, AW, Mohd Roslan, ME, Mohamed, H, Ramli, MZ, Mansor, MH, Adria Syaifoel, FN, Zakaria, AA, Isa, MR, Mohamad, D, Jaafar, MF, Rahmat, NA & Abd. Rahman, MS 2019, Development of solar powered water treatment device (SWAD) prototype. in SZBA Rahim & MMA-BB Abdullah (eds), 5th International Conference on Green Design and Manufacture, IConGDM 2019., 020019, AIP Conference Proceedings, vol. 2129, American Institute of Physics Inc., 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, Kota Bandung, Jawa Barat, Indonesia, 29/04/19. https://doi.org/10.1063/1.5118027

Development of solar powered water treatment device (SWAD) prototype. / Ismail, Iszmir Nazmi; Khean, Foo Fang; Zawawi, Mohd Hafiz; Zahari, N. M.; Abidin, S. Z.; Yusairah, W. N.; Mahmood Zuhdi, Ahmad Wafi; Mohd Roslan, Mohd Eqwan; Mohamed, Hassan; Ramli, Mohd Zakwan; Mansor, Mohd Helmi; Adria Syaifoel, Fevilia Nurnadia; Zakaria, A. A.; Isa, Mohd Rashdan; Mohamad, Daud; Jaafar, M. F.; Rahmat, Nur Azzammudin; Abd. Rahman, Muhamad Safwan.

5th International Conference on Green Design and Manufacture, IConGDM 2019. ed. / Shayfull Zamree Bin Abd. Rahim; Mohd Mustafa Al-Bakri Bin Abdullah. American Institute of Physics Inc., 2019. 020019 (AIP Conference Proceedings; Vol. 2129).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Development of solar powered water treatment device (SWAD) prototype

AU - Ismail, Iszmir Nazmi

AU - Khean, Foo Fang

AU - Zawawi, Mohd Hafiz

AU - Zahari, N. M.

AU - Abidin, S. Z.

AU - Yusairah, W. N.

AU - Mahmood Zuhdi, Ahmad Wafi

AU - Mohd Roslan, Mohd Eqwan

AU - Mohamed, Hassan

AU - Ramli, Mohd Zakwan

AU - Mansor, Mohd Helmi

AU - Adria Syaifoel, Fevilia Nurnadia

AU - Zakaria, A. A.

AU - Isa, Mohd Rashdan

AU - Mohamad, Daud

AU - Jaafar, M. F.

AU - Rahmat, Nur Azzammudin

AU - Abd. Rahman, Muhamad Safwan

PY - 2019/7/30

Y1 - 2019/7/30

N2 - Water is the most essential element for life, there are still some remote areas in Malaysia where clean freshwater is not accessible, this problem had troubled the locals for decades. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The pumps used for the device will obtain the energy from the solar panel to pump water into the filter. For this project, the device is being tested at the UNITEN lake. The main objective of development solar powered treatment device prototyope (SWAD) is to improve the water quality by selecting a suitable water filter while the device is supported by a stable structure. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. The structure of the device is made of combination aluminium which is light weight, sturdy and not reactive to water. The solar panel that has been selected is rated at 250W and it is sufficient to power four pumps rated at 30W.

AB - Water is the most essential element for life, there are still some remote areas in Malaysia where clean freshwater is not accessible, this problem had troubled the locals for decades. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The pumps used for the device will obtain the energy from the solar panel to pump water into the filter. For this project, the device is being tested at the UNITEN lake. The main objective of development solar powered treatment device prototyope (SWAD) is to improve the water quality by selecting a suitable water filter while the device is supported by a stable structure. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. The structure of the device is made of combination aluminium which is light weight, sturdy and not reactive to water. The solar panel that has been selected is rated at 250W and it is sufficient to power four pumps rated at 30W.

UR - http://www.scopus.com/inward/record.url?scp=85070541913&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070541913&partnerID=8YFLogxK

U2 - 10.1063/1.5118027

DO - 10.1063/1.5118027

M3 - Conference contribution

AN - SCOPUS:85070541913

T3 - AIP Conference Proceedings

BT - 5th International Conference on Green Design and Manufacture, IConGDM 2019

A2 - Rahim, Shayfull Zamree Bin Abd.

A2 - Abdullah, Mohd Mustafa Al-Bakri Bin

PB - American Institute of Physics Inc.

ER -

Ismail IN, Khean FF, Zawawi MH, Zahari NM, Abidin SZ, Yusairah WN et al. Development of solar powered water treatment device (SWAD) prototype. In Rahim SZBA, Abdullah MMA-BB, editors, 5th International Conference on Green Design and Manufacture, IConGDM 2019. American Institute of Physics Inc. 2019. 020019. (AIP Conference Proceedings). https://doi.org/10.1063/1.5118027