Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper describes design of a rat-race coupler for operation at centering frequency of 5.8 GHz. The coupler is designed to have an equal power split outputs of 3 dB between output ports. Two types of power divider circuit configurations have been designed and analyzed. The coupler is designed using the Electronics Design Automation (EDA) tool that has tuning and optimization features. The circuit design iteration and the time required have been significantly reduced as the physical dimension of the circuit is tunable. The effects of the microwave artwork on circuit performance are observed. The rat-race coupler is implemented in the microstrip line and RO4003C® substrate is used.

Original languageEnglish
Title of host publication2006 International RF AND Microwave Conference, (RFM) Proceedings
Pages253-257
Number of pages5
DOIs
Publication statusPublished - 2006
Event2006 International RF and Microwave Conference, RFM - Putrajaya, Malaysia
Duration: 12 Sep 200614 Sep 2006

Other

Other2006 International RF and Microwave Conference, RFM
CountryMalaysia
CityPutrajaya
Period12/09/0614/09/06

Fingerprint

Networks (circuits)
Substrates
Microstrip lines
Tuning
Microwaves
Electronic design automation

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Goh, C. H., & Kumar Chakrabarty, C. (2006). Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate. In 2006 International RF AND Microwave Conference, (RFM) Proceedings (pp. 253-257). [4133595] https://doi.org/10.1109/RFM.2006.331080
Goh, Chin Hock ; Kumar Chakrabarty, Chandan. / Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate. 2006 International RF AND Microwave Conference, (RFM) Proceedings. 2006. pp. 253-257
@inproceedings{da84b5c89af44432a9d872cf4bad3f64,
title = "Design of a 5.8 GHz rat-race coupler on the RO4003C{\circledR} substrate",
abstract = "This paper describes design of a rat-race coupler for operation at centering frequency of 5.8 GHz. The coupler is designed to have an equal power split outputs of 3 dB between output ports. Two types of power divider circuit configurations have been designed and analyzed. The coupler is designed using the Electronics Design Automation (EDA) tool that has tuning and optimization features. The circuit design iteration and the time required have been significantly reduced as the physical dimension of the circuit is tunable. The effects of the microwave artwork on circuit performance are observed. The rat-race coupler is implemented in the microstrip line and RO4003C{\circledR} substrate is used.",
author = "Goh, {Chin Hock} and {Kumar Chakrabarty}, Chandan",
year = "2006",
doi = "10.1109/RFM.2006.331080",
language = "English",
isbn = "0780397444",
pages = "253--257",
booktitle = "2006 International RF AND Microwave Conference, (RFM) Proceedings",

}

Goh, CH & Kumar Chakrabarty, C 2006, Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate. in 2006 International RF AND Microwave Conference, (RFM) Proceedings., 4133595, pp. 253-257, 2006 International RF and Microwave Conference, RFM, Putrajaya, Malaysia, 12/09/06. https://doi.org/10.1109/RFM.2006.331080

Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate. / Goh, Chin Hock; Kumar Chakrabarty, Chandan.

2006 International RF AND Microwave Conference, (RFM) Proceedings. 2006. p. 253-257 4133595.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate

AU - Goh, Chin Hock

AU - Kumar Chakrabarty, Chandan

PY - 2006

Y1 - 2006

N2 - This paper describes design of a rat-race coupler for operation at centering frequency of 5.8 GHz. The coupler is designed to have an equal power split outputs of 3 dB between output ports. Two types of power divider circuit configurations have been designed and analyzed. The coupler is designed using the Electronics Design Automation (EDA) tool that has tuning and optimization features. The circuit design iteration and the time required have been significantly reduced as the physical dimension of the circuit is tunable. The effects of the microwave artwork on circuit performance are observed. The rat-race coupler is implemented in the microstrip line and RO4003C® substrate is used.

AB - This paper describes design of a rat-race coupler for operation at centering frequency of 5.8 GHz. The coupler is designed to have an equal power split outputs of 3 dB between output ports. Two types of power divider circuit configurations have been designed and analyzed. The coupler is designed using the Electronics Design Automation (EDA) tool that has tuning and optimization features. The circuit design iteration and the time required have been significantly reduced as the physical dimension of the circuit is tunable. The effects of the microwave artwork on circuit performance are observed. The rat-race coupler is implemented in the microstrip line and RO4003C® substrate is used.

UR - http://www.scopus.com/inward/record.url?scp=46249090145&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=46249090145&partnerID=8YFLogxK

U2 - 10.1109/RFM.2006.331080

DO - 10.1109/RFM.2006.331080

M3 - Conference contribution

SN - 0780397444

SN - 9780780397446

SP - 253

EP - 257

BT - 2006 International RF AND Microwave Conference, (RFM) Proceedings

ER -

Goh CH, Kumar Chakrabarty C. Design of a 5.8 GHz rat-race coupler on the RO4003C® substrate. In 2006 International RF AND Microwave Conference, (RFM) Proceedings. 2006. p. 253-257. 4133595 https://doi.org/10.1109/RFM.2006.331080