Design of a 5.8 GHz directional coupler using electronics design automation tool

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper describes the quick way to design 5.8 GHz directional coupler by using the latest version of Electronics Design Automation (EDA) tool. The special features from the EDA tool ease the design of the circuitry with the considerations towards cost and time. It also reduces the design latency as faced by designer as many of the design methodology are simplified. In highlighting these prevailing features, 15 dB, 5.8 GHz single layer directional coupler is designed and analyzed. In designing this passive circuit, microstrip lines are implemented

Original languageEnglish
Title of host publication2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings
Pages194-197
Number of pages4
Volume2005
DOIs
Publication statusPublished - 2005
Event2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Johor, Malaysia
Duration: 20 Dec 200521 Dec 2005

Other

Other2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005
CountryMalaysia
CityJohor
Period20/12/0521/12/05

Fingerprint

Directional couplers
Passive networks
Microstrip lines
Electronic design automation
Costs

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Goh, C. H., & Kumar Chakrabarty, C. (2005). Design of a 5.8 GHz directional coupler using electronics design automation tool. In 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings (Vol. 2005, pp. 194-197). [1607805] https://doi.org/10.1109/APACE.2005.1607805
Goh, Chin Hock ; Kumar Chakrabarty, Chandan. / Design of a 5.8 GHz directional coupler using electronics design automation tool. 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings. Vol. 2005 2005. pp. 194-197
@inproceedings{b220146337754e41905712c86e642a4b,
title = "Design of a 5.8 GHz directional coupler using electronics design automation tool",
abstract = "This paper describes the quick way to design 5.8 GHz directional coupler by using the latest version of Electronics Design Automation (EDA) tool. The special features from the EDA tool ease the design of the circuitry with the considerations towards cost and time. It also reduces the design latency as faced by designer as many of the design methodology are simplified. In highlighting these prevailing features, 15 dB, 5.8 GHz single layer directional coupler is designed and analyzed. In designing this passive circuit, microstrip lines are implemented",
author = "Goh, {Chin Hock} and {Kumar Chakrabarty}, Chandan",
year = "2005",
doi = "10.1109/APACE.2005.1607805",
language = "English",
isbn = "0780394313",
volume = "2005",
pages = "194--197",
booktitle = "2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings",

}

Goh, CH & Kumar Chakrabarty, C 2005, Design of a 5.8 GHz directional coupler using electronics design automation tool. in 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings. vol. 2005, 1607805, pp. 194-197, 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005, Johor, Malaysia, 20/12/05. https://doi.org/10.1109/APACE.2005.1607805

Design of a 5.8 GHz directional coupler using electronics design automation tool. / Goh, Chin Hock; Kumar Chakrabarty, Chandan.

2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings. Vol. 2005 2005. p. 194-197 1607805.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design of a 5.8 GHz directional coupler using electronics design automation tool

AU - Goh, Chin Hock

AU - Kumar Chakrabarty, Chandan

PY - 2005

Y1 - 2005

N2 - This paper describes the quick way to design 5.8 GHz directional coupler by using the latest version of Electronics Design Automation (EDA) tool. The special features from the EDA tool ease the design of the circuitry with the considerations towards cost and time. It also reduces the design latency as faced by designer as many of the design methodology are simplified. In highlighting these prevailing features, 15 dB, 5.8 GHz single layer directional coupler is designed and analyzed. In designing this passive circuit, microstrip lines are implemented

AB - This paper describes the quick way to design 5.8 GHz directional coupler by using the latest version of Electronics Design Automation (EDA) tool. The special features from the EDA tool ease the design of the circuitry with the considerations towards cost and time. It also reduces the design latency as faced by designer as many of the design methodology are simplified. In highlighting these prevailing features, 15 dB, 5.8 GHz single layer directional coupler is designed and analyzed. In designing this passive circuit, microstrip lines are implemented

UR - http://www.scopus.com/inward/record.url?scp=33847274737&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847274737&partnerID=8YFLogxK

U2 - 10.1109/APACE.2005.1607805

DO - 10.1109/APACE.2005.1607805

M3 - Conference contribution

SN - 0780394313

SN - 9780780394315

VL - 2005

SP - 194

EP - 197

BT - 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings

ER -

Goh CH, Kumar Chakrabarty C. Design of a 5.8 GHz directional coupler using electronics design automation tool. In 2005 Asia-Pacific Conference on Applied Electromagnetics, APACE 2005 - Proceedings. Vol. 2005. 2005. p. 194-197. 1607805 https://doi.org/10.1109/APACE.2005.1607805