Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The Solenoid Powered Engine (SPE) is one of the feasible alternative prime movers to replace the existing electric motors. From the machine's design and operational perspective, this particular prime mover design holds a few advantages over the existing electric motor designs. However, SPE development is still in its infant stages and future studies and improvements are required to further refine the SPE wide potential. Therefore, the authors have developed a simulation template model to identify the machine's terminal characteristic. The simulation template model is based on the machine's power flow and mechanical linkages or operations. As a result, the authors managed to create a simulation model for the machine and also introduced the SPE terminal characteristic, which is similar to a DC series motor. The simulation model can be used to simulate various SPE designs for future developments. This paper basically describes the SPE simulation design, torque vs. speed characteristic and analysis.

Original languageEnglish
Title of host publicationConference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014
EditorsMohd Izhwan Muhamad, Mohammad Nawawi Seroji
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages255-259
Number of pages5
ISBN (Electronic)9781479972975
DOIs
Publication statusPublished - 17 Mar 2014
Event2014 IEEE International Conference on Power and Energy, PECon 2014 - Kuching, Sarawak, Malaysia
Duration: 01 Dec 201403 Dec 2014

Publication series

NameConference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

Other

Other2014 IEEE International Conference on Power and Energy, PECon 2014
CountryMalaysia
CityKuching, Sarawak
Period01/12/1403/12/14

Fingerprint

Solenoids
Torque
Engines
Electric motors
Machine design

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Bahrin, S. Z. A. S. K., & Amirulddin, U. A. U. (2014). Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic). In M. I. Muhamad, & M. N. Seroji (Eds.), Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014 (pp. 255-259). [7062452] (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PECON.2014.7062452
Bahrin, Syed Zainal Abidin Syed Kamarul ; Amirulddin, Ungku Anisa Ungku. / Design and development of a new electromagnetic prime mover using solenoid technology : Solenoid Powered Engine model simulation (torque vs. speed characteristic). Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. editor / Mohd Izhwan Muhamad ; Mohammad Nawawi Seroji. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 255-259 (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014).
@inproceedings{6bc1e5191de44085b9c48c3423ada7ca,
title = "Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic)",
abstract = "The Solenoid Powered Engine (SPE) is one of the feasible alternative prime movers to replace the existing electric motors. From the machine's design and operational perspective, this particular prime mover design holds a few advantages over the existing electric motor designs. However, SPE development is still in its infant stages and future studies and improvements are required to further refine the SPE wide potential. Therefore, the authors have developed a simulation template model to identify the machine's terminal characteristic. The simulation template model is based on the machine's power flow and mechanical linkages or operations. As a result, the authors managed to create a simulation model for the machine and also introduced the SPE terminal characteristic, which is similar to a DC series motor. The simulation model can be used to simulate various SPE designs for future developments. This paper basically describes the SPE simulation design, torque vs. speed characteristic and analysis.",
author = "Bahrin, {Syed Zainal Abidin Syed Kamarul} and Amirulddin, {Ungku Anisa Ungku}",
year = "2014",
month = "3",
day = "17",
doi = "10.1109/PECON.2014.7062452",
language = "English",
series = "Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "255--259",
editor = "Muhamad, {Mohd Izhwan} and Seroji, {Mohammad Nawawi}",
booktitle = "Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014",
address = "United States",

}

Bahrin, SZASK & Amirulddin, UAU 2014, Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic). in MI Muhamad & MN Seroji (eds), Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014., 7062452, Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014, Institute of Electrical and Electronics Engineers Inc., pp. 255-259, 2014 IEEE International Conference on Power and Energy, PECon 2014, Kuching, Sarawak, Malaysia, 01/12/14. https://doi.org/10.1109/PECON.2014.7062452

Design and development of a new electromagnetic prime mover using solenoid technology : Solenoid Powered Engine model simulation (torque vs. speed characteristic). / Bahrin, Syed Zainal Abidin Syed Kamarul; Amirulddin, Ungku Anisa Ungku.

Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. ed. / Mohd Izhwan Muhamad; Mohammad Nawawi Seroji. Institute of Electrical and Electronics Engineers Inc., 2014. p. 255-259 7062452 (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design and development of a new electromagnetic prime mover using solenoid technology

T2 - Solenoid Powered Engine model simulation (torque vs. speed characteristic)

AU - Bahrin, Syed Zainal Abidin Syed Kamarul

AU - Amirulddin, Ungku Anisa Ungku

PY - 2014/3/17

Y1 - 2014/3/17

N2 - The Solenoid Powered Engine (SPE) is one of the feasible alternative prime movers to replace the existing electric motors. From the machine's design and operational perspective, this particular prime mover design holds a few advantages over the existing electric motor designs. However, SPE development is still in its infant stages and future studies and improvements are required to further refine the SPE wide potential. Therefore, the authors have developed a simulation template model to identify the machine's terminal characteristic. The simulation template model is based on the machine's power flow and mechanical linkages or operations. As a result, the authors managed to create a simulation model for the machine and also introduced the SPE terminal characteristic, which is similar to a DC series motor. The simulation model can be used to simulate various SPE designs for future developments. This paper basically describes the SPE simulation design, torque vs. speed characteristic and analysis.

AB - The Solenoid Powered Engine (SPE) is one of the feasible alternative prime movers to replace the existing electric motors. From the machine's design and operational perspective, this particular prime mover design holds a few advantages over the existing electric motor designs. However, SPE development is still in its infant stages and future studies and improvements are required to further refine the SPE wide potential. Therefore, the authors have developed a simulation template model to identify the machine's terminal characteristic. The simulation template model is based on the machine's power flow and mechanical linkages or operations. As a result, the authors managed to create a simulation model for the machine and also introduced the SPE terminal characteristic, which is similar to a DC series motor. The simulation model can be used to simulate various SPE designs for future developments. This paper basically describes the SPE simulation design, torque vs. speed characteristic and analysis.

UR - http://www.scopus.com/inward/record.url?scp=84946688815&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946688815&partnerID=8YFLogxK

U2 - 10.1109/PECON.2014.7062452

DO - 10.1109/PECON.2014.7062452

M3 - Conference contribution

AN - SCOPUS:84946688815

T3 - Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

SP - 255

EP - 259

BT - Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

A2 - Muhamad, Mohd Izhwan

A2 - Seroji, Mohammad Nawawi

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Bahrin SZASK, Amirulddin UAU. Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine model simulation (torque vs. speed characteristic). In Muhamad MI, Seroji MN, editors, Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 255-259. 7062452. (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014). https://doi.org/10.1109/PECON.2014.7062452