Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle

N. M. Noor, S. I. Aris, S. Arof, M. Norhisam, A.k.m. Parvez Iqbal

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper describes the design and analytical study of tubular linear electromagnetic pulsing motor (EMPM) model with the high response characteristic to suit the electric vehicle (EV) application. The new tubular linear EMPM model based on the working principle of the reciprocating motion, which can eliminate problems related to internal combustion engines such as engine weight and friction where fewer components are used. In this paper, the tubular linear EMPM model has established a mathematical model by equivalent magnetic circuits and permeance analysis methods, which it the same technique as the electric circuit. Furthermore, the magnetic force of the coil and plunger rod was calculated; the design of the electromagnetic tubular linear EMPM is focused on engineering finite element analysis 3D Maxwell software. Finally, the simulation result of tubular linear EMPM are measured the plunger force is ∼37.2KN, thrust is ∼60Nm, plunger distance is 75mm, motor speed is ∼7500RPM and power motor is ∼12.3KW. at current supply 200A. Thus, the graph result shows the comparison between a theoretical and finite element of analysis tubular linear EMPM.

Original languageEnglish
Title of host publicationProceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018
EditorsWan Azmi Wan Hamzah, Saiful Anwar Che Ghani, Mohd. Shahrir Mohd Sani, Abdul Adam Abdullah
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735417878
DOIs
Publication statusPublished - 11 Jan 2019
Event3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018 - Kuantan, Malaysia
Duration: 25 Jul 201826 Jul 2018

Publication series

NameAIP Conference Proceedings
Volume2059
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Other

Other3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018
CountryMalaysia
CityKuantan
Period25/07/1826/07/18

Fingerprint

vehicles
electromagnetism
plungers
magnetic circuits
internal combustion engines
equivalent circuits
thrust
engines
mathematical models
coils
rods
friction
engineering
computer programs
simulation

All Science Journal Classification (ASJC) codes

  • Ecology, Evolution, Behavior and Systematics
  • Ecology
  • Plant Science
  • Physics and Astronomy(all)
  • Nature and Landscape Conservation

Cite this

Noor, N. M., Aris, S. I., Arof, S., Norhisam, M., & Iqbal, A. K. M. P. (2019). Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle. In W. A. W. Hamzah, S. A. C. Ghani, M. S. M. Sani, & A. A. Abdullah (Eds.), Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018 [020016] (AIP Conference Proceedings; Vol. 2059). American Institute of Physics Inc.. https://doi.org/10.1063/1.5085959
Noor, N. M. ; Aris, S. I. ; Arof, S. ; Norhisam, M. ; Iqbal, A.k.m. Parvez. / Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle. Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018. editor / Wan Azmi Wan Hamzah ; Saiful Anwar Che Ghani ; Mohd. Shahrir Mohd Sani ; Abdul Adam Abdullah. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).
@inproceedings{8a514350705640bfabf6436027f0f11a,
title = "Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle",
abstract = "This paper describes the design and analytical study of tubular linear electromagnetic pulsing motor (EMPM) model with the high response characteristic to suit the electric vehicle (EV) application. The new tubular linear EMPM model based on the working principle of the reciprocating motion, which can eliminate problems related to internal combustion engines such as engine weight and friction where fewer components are used. In this paper, the tubular linear EMPM model has established a mathematical model by equivalent magnetic circuits and permeance analysis methods, which it the same technique as the electric circuit. Furthermore, the magnetic force of the coil and plunger rod was calculated; the design of the electromagnetic tubular linear EMPM is focused on engineering finite element analysis 3D Maxwell software. Finally, the simulation result of tubular linear EMPM are measured the plunger force is ∼37.2KN, thrust is ∼60Nm, plunger distance is 75mm, motor speed is ∼7500RPM and power motor is ∼12.3KW. at current supply 200A. Thus, the graph result shows the comparison between a theoretical and finite element of analysis tubular linear EMPM.",
author = "Noor, {N. M.} and Aris, {S. I.} and S. Arof and M. Norhisam and Iqbal, {A.k.m. Parvez}",
year = "2019",
month = "1",
day = "11",
doi = "10.1063/1.5085959",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Hamzah, {Wan Azmi Wan} and Ghani, {Saiful Anwar Che} and Sani, {Mohd. Shahrir Mohd} and Abdullah, {Abdul Adam}",
booktitle = "Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018",

}

Noor, NM, Aris, SI, Arof, S, Norhisam, M & Iqbal, AKMP 2019, Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle. in WAW Hamzah, SAC Ghani, MSM Sani & AA Abdullah (eds), Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018., 020016, AIP Conference Proceedings, vol. 2059, American Institute of Physics Inc., 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, Kuantan, Malaysia, 25/07/18. https://doi.org/10.1063/1.5085959

Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle. / Noor, N. M.; Aris, S. I.; Arof, S.; Norhisam, M.; Iqbal, A.k.m. Parvez.

Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018. ed. / Wan Azmi Wan Hamzah; Saiful Anwar Che Ghani; Mohd. Shahrir Mohd Sani; Abdul Adam Abdullah. American Institute of Physics Inc., 2019. 020016 (AIP Conference Proceedings; Vol. 2059).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle

AU - Noor, N. M.

AU - Aris, S. I.

AU - Arof, S.

AU - Norhisam, M.

AU - Iqbal, A.k.m. Parvez

PY - 2019/1/11

Y1 - 2019/1/11

N2 - This paper describes the design and analytical study of tubular linear electromagnetic pulsing motor (EMPM) model with the high response characteristic to suit the electric vehicle (EV) application. The new tubular linear EMPM model based on the working principle of the reciprocating motion, which can eliminate problems related to internal combustion engines such as engine weight and friction where fewer components are used. In this paper, the tubular linear EMPM model has established a mathematical model by equivalent magnetic circuits and permeance analysis methods, which it the same technique as the electric circuit. Furthermore, the magnetic force of the coil and plunger rod was calculated; the design of the electromagnetic tubular linear EMPM is focused on engineering finite element analysis 3D Maxwell software. Finally, the simulation result of tubular linear EMPM are measured the plunger force is ∼37.2KN, thrust is ∼60Nm, plunger distance is 75mm, motor speed is ∼7500RPM and power motor is ∼12.3KW. at current supply 200A. Thus, the graph result shows the comparison between a theoretical and finite element of analysis tubular linear EMPM.

AB - This paper describes the design and analytical study of tubular linear electromagnetic pulsing motor (EMPM) model with the high response characteristic to suit the electric vehicle (EV) application. The new tubular linear EMPM model based on the working principle of the reciprocating motion, which can eliminate problems related to internal combustion engines such as engine weight and friction where fewer components are used. In this paper, the tubular linear EMPM model has established a mathematical model by equivalent magnetic circuits and permeance analysis methods, which it the same technique as the electric circuit. Furthermore, the magnetic force of the coil and plunger rod was calculated; the design of the electromagnetic tubular linear EMPM is focused on engineering finite element analysis 3D Maxwell software. Finally, the simulation result of tubular linear EMPM are measured the plunger force is ∼37.2KN, thrust is ∼60Nm, plunger distance is 75mm, motor speed is ∼7500RPM and power motor is ∼12.3KW. at current supply 200A. Thus, the graph result shows the comparison between a theoretical and finite element of analysis tubular linear EMPM.

UR - http://www.scopus.com/inward/record.url?scp=85060443334&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85060443334&partnerID=8YFLogxK

U2 - 10.1063/1.5085959

DO - 10.1063/1.5085959

M3 - Conference contribution

AN - SCOPUS:85060443334

T3 - AIP Conference Proceedings

BT - Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018

A2 - Hamzah, Wan Azmi Wan

A2 - Ghani, Saiful Anwar Che

A2 - Sani, Mohd. Shahrir Mohd

A2 - Abdullah, Abdul Adam

PB - American Institute of Physics Inc.

ER -

Noor NM, Aris SI, Arof S, Norhisam M, Iqbal AKMP. Design and analytical study of tubular linear electromagnetic pulsing motor as an alternative for electric vehicle. In Hamzah WAW, Ghani SAC, Sani MSM, Abdullah AA, editors, Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018. American Institute of Physics Inc. 2019. 020016. (AIP Conference Proceedings). https://doi.org/10.1063/1.5085959