Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The study is about impact of a short viscoelastic slug on a stationary semi-infinite viscoelastic rod. The viscoelastic materials are modeled as standard linear solid which involve three material parameters and the motion is treated as one-dimensional. We first establish the governing equations pertaining to the impact of viscoelastic materials subject to certain boundary conditions for the case when a viscoelastic slug moving at a speed V impacts a semi-infinite stationary viscoelastic rod. In order to validate the numerical results, we derive the effective ratio of acoustic impedance for impacting rods which will be used in the viscoelastic discontinuity analysis. The objective of this study is to investigate how the viscosity time constants in the slug and in the rod give rise to different interface stresses and interface velocities following wave transmission in the slug. After modeling the impact and solving the governing system of partial differential equations in the Laplace transform domain, we invert the Laplace transformed solution numerically to obtain the stresses and velocities. In inverting the Laplace transformed equations we used the complex inversion formula (Bromwich contour). In validating the numerical results, the method of viscoelastic discontinuity analysis is engaged to determine the first discontinuity jump at the interface. Finally, we discussed the relationship between the viscosity time constants, ratios of acoustic impedances and the results of the viscoelastic impacts obtained numerically and the predictions acquired using the multiple scales in perturbation.

Original languageEnglish
Title of host publicationMechanical and Materials Engineering
PublisherTrans Tech Publications Ltd
Pages701-711
Number of pages11
ISBN (Print)9783038351092
DOIs
Publication statusPublished - 01 Jan 2014

Publication series

NameApplied Mechanics and Materials
Volume554
ISSN (Print)1660-9336
ISSN (Electronic)1662-7482

Fingerprint

Acoustic impedance
Viscosity
Laplace equation
Wave transmission
Laplace transforms
Partial differential equations
Boundary conditions

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Haji Musa, A. B. (2014). Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod. In Mechanical and Materials Engineering (pp. 701-711). (Applied Mechanics and Materials; Vol. 554). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.554.701
Haji Musa, Abu Bakar. / Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod. Mechanical and Materials Engineering. Trans Tech Publications Ltd, 2014. pp. 701-711 (Applied Mechanics and Materials).
@inproceedings{e2188b5349704c958f9ebd04260316d9,
title = "Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod",
abstract = "The study is about impact of a short viscoelastic slug on a stationary semi-infinite viscoelastic rod. The viscoelastic materials are modeled as standard linear solid which involve three material parameters and the motion is treated as one-dimensional. We first establish the governing equations pertaining to the impact of viscoelastic materials subject to certain boundary conditions for the case when a viscoelastic slug moving at a speed V impacts a semi-infinite stationary viscoelastic rod. In order to validate the numerical results, we derive the effective ratio of acoustic impedance for impacting rods which will be used in the viscoelastic discontinuity analysis. The objective of this study is to investigate how the viscosity time constants in the slug and in the rod give rise to different interface stresses and interface velocities following wave transmission in the slug. After modeling the impact and solving the governing system of partial differential equations in the Laplace transform domain, we invert the Laplace transformed solution numerically to obtain the stresses and velocities. In inverting the Laplace transformed equations we used the complex inversion formula (Bromwich contour). In validating the numerical results, the method of viscoelastic discontinuity analysis is engaged to determine the first discontinuity jump at the interface. Finally, we discussed the relationship between the viscosity time constants, ratios of acoustic impedances and the results of the viscoelastic impacts obtained numerically and the predictions acquired using the multiple scales in perturbation.",
author = "{Haji Musa}, {Abu Bakar}",
year = "2014",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/AMM.554.701",
language = "English",
isbn = "9783038351092",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "701--711",
booktitle = "Mechanical and Materials Engineering",

}

Haji Musa, AB 2014, Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod. in Mechanical and Materials Engineering. Applied Mechanics and Materials, vol. 554, Trans Tech Publications Ltd, pp. 701-711. https://doi.org/10.4028/www.scientific.net/AMM.554.701

Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod. / Haji Musa, Abu Bakar.

Mechanical and Materials Engineering. Trans Tech Publications Ltd, 2014. p. 701-711 (Applied Mechanics and Materials; Vol. 554).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Derivation of effective ratio of acoustic impedance for impacting viscoelastic slug (Standard Linear Solid Model) and elastic rod

AU - Haji Musa, Abu Bakar

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The study is about impact of a short viscoelastic slug on a stationary semi-infinite viscoelastic rod. The viscoelastic materials are modeled as standard linear solid which involve three material parameters and the motion is treated as one-dimensional. We first establish the governing equations pertaining to the impact of viscoelastic materials subject to certain boundary conditions for the case when a viscoelastic slug moving at a speed V impacts a semi-infinite stationary viscoelastic rod. In order to validate the numerical results, we derive the effective ratio of acoustic impedance for impacting rods which will be used in the viscoelastic discontinuity analysis. The objective of this study is to investigate how the viscosity time constants in the slug and in the rod give rise to different interface stresses and interface velocities following wave transmission in the slug. After modeling the impact and solving the governing system of partial differential equations in the Laplace transform domain, we invert the Laplace transformed solution numerically to obtain the stresses and velocities. In inverting the Laplace transformed equations we used the complex inversion formula (Bromwich contour). In validating the numerical results, the method of viscoelastic discontinuity analysis is engaged to determine the first discontinuity jump at the interface. Finally, we discussed the relationship between the viscosity time constants, ratios of acoustic impedances and the results of the viscoelastic impacts obtained numerically and the predictions acquired using the multiple scales in perturbation.

AB - The study is about impact of a short viscoelastic slug on a stationary semi-infinite viscoelastic rod. The viscoelastic materials are modeled as standard linear solid which involve three material parameters and the motion is treated as one-dimensional. We first establish the governing equations pertaining to the impact of viscoelastic materials subject to certain boundary conditions for the case when a viscoelastic slug moving at a speed V impacts a semi-infinite stationary viscoelastic rod. In order to validate the numerical results, we derive the effective ratio of acoustic impedance for impacting rods which will be used in the viscoelastic discontinuity analysis. The objective of this study is to investigate how the viscosity time constants in the slug and in the rod give rise to different interface stresses and interface velocities following wave transmission in the slug. After modeling the impact and solving the governing system of partial differential equations in the Laplace transform domain, we invert the Laplace transformed solution numerically to obtain the stresses and velocities. In inverting the Laplace transformed equations we used the complex inversion formula (Bromwich contour). In validating the numerical results, the method of viscoelastic discontinuity analysis is engaged to determine the first discontinuity jump at the interface. Finally, we discussed the relationship between the viscosity time constants, ratios of acoustic impedances and the results of the viscoelastic impacts obtained numerically and the predictions acquired using the multiple scales in perturbation.

UR - http://www.scopus.com/inward/record.url?scp=84903513244&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903513244&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.554.701

DO - 10.4028/www.scientific.net/AMM.554.701

M3 - Conference contribution

SN - 9783038351092

T3 - Applied Mechanics and Materials

SP - 701

EP - 711

BT - Mechanical and Materials Engineering

PB - Trans Tech Publications Ltd

ER -