Corrosivity and leaching behavior of controlled low-strength material (CLSM) made using bottom ash and quarry dust

Sivakumar Naganathan, Hashim Abdul Razak, Siti Nadzriah Abdul Hamid

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

This paper reports the corrosivity and leaching behavior of CLSM made using two different industrial wastes i.e. bottom ash from an incineration facility and quarry dust. The leachate samples were derived from fresh and hardened CLSM mixtures, and studied for leaching and electrical resistivity. The release of various contaminants and the consequent environmental impact caused by the contaminants were studied by the measurement of contaminants in the bleed, in the leachate at 28 days, and on the leachate derived from crushed block and whole block leaching done over a period of 126 days. Results indicated that the CLSM mixtures are non corrosive; diffusion was the leaching mechanism; and the contaminants were found to be moderate to low mobility.

Original languageEnglish
Pages (from-to)637-641
Number of pages5
JournalJournal of Environmental Management
Volume128
DOIs
Publication statusPublished - 15 Oct 2013

Fingerprint

Ashes
bottom ash
Quarries
quarry
Leaching
Dust
leaching
Impurities
dust
leachate
pollutant
Waste incineration
Industrial wastes
industrial waste
incineration
Environmental impact
electrical resistivity
environmental impact
material

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Waste Management and Disposal
  • Management, Monitoring, Policy and Law

Cite this

@article{3357557e99dc4845b1e9bb8cd6900d55,
title = "Corrosivity and leaching behavior of controlled low-strength material (CLSM) made using bottom ash and quarry dust",
abstract = "This paper reports the corrosivity and leaching behavior of CLSM made using two different industrial wastes i.e. bottom ash from an incineration facility and quarry dust. The leachate samples were derived from fresh and hardened CLSM mixtures, and studied for leaching and electrical resistivity. The release of various contaminants and the consequent environmental impact caused by the contaminants were studied by the measurement of contaminants in the bleed, in the leachate at 28 days, and on the leachate derived from crushed block and whole block leaching done over a period of 126 days. Results indicated that the CLSM mixtures are non corrosive; diffusion was the leaching mechanism; and the contaminants were found to be moderate to low mobility.",
author = "Sivakumar Naganathan and Razak, {Hashim Abdul} and Hamid, {Siti Nadzriah Abdul}",
year = "2013",
month = "10",
day = "15",
doi = "10.1016/j.jenvman.2013.06.009",
language = "English",
volume = "128",
pages = "637--641",
journal = "Journal of Environmental Management",
issn = "0301-4797",
publisher = "Academic Press Inc.",

}

Corrosivity and leaching behavior of controlled low-strength material (CLSM) made using bottom ash and quarry dust. / Naganathan, Sivakumar; Razak, Hashim Abdul; Hamid, Siti Nadzriah Abdul.

In: Journal of Environmental Management, Vol. 128, 15.10.2013, p. 637-641.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Corrosivity and leaching behavior of controlled low-strength material (CLSM) made using bottom ash and quarry dust

AU - Naganathan, Sivakumar

AU - Razak, Hashim Abdul

AU - Hamid, Siti Nadzriah Abdul

PY - 2013/10/15

Y1 - 2013/10/15

N2 - This paper reports the corrosivity and leaching behavior of CLSM made using two different industrial wastes i.e. bottom ash from an incineration facility and quarry dust. The leachate samples were derived from fresh and hardened CLSM mixtures, and studied for leaching and electrical resistivity. The release of various contaminants and the consequent environmental impact caused by the contaminants were studied by the measurement of contaminants in the bleed, in the leachate at 28 days, and on the leachate derived from crushed block and whole block leaching done over a period of 126 days. Results indicated that the CLSM mixtures are non corrosive; diffusion was the leaching mechanism; and the contaminants were found to be moderate to low mobility.

AB - This paper reports the corrosivity and leaching behavior of CLSM made using two different industrial wastes i.e. bottom ash from an incineration facility and quarry dust. The leachate samples were derived from fresh and hardened CLSM mixtures, and studied for leaching and electrical resistivity. The release of various contaminants and the consequent environmental impact caused by the contaminants were studied by the measurement of contaminants in the bleed, in the leachate at 28 days, and on the leachate derived from crushed block and whole block leaching done over a period of 126 days. Results indicated that the CLSM mixtures are non corrosive; diffusion was the leaching mechanism; and the contaminants were found to be moderate to low mobility.

UR - http://www.scopus.com/inward/record.url?scp=84880341048&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84880341048&partnerID=8YFLogxK

U2 - 10.1016/j.jenvman.2013.06.009

DO - 10.1016/j.jenvman.2013.06.009

M3 - Article

C2 - 23845957

AN - SCOPUS:84880341048

VL - 128

SP - 637

EP - 641

JO - Journal of Environmental Management

JF - Journal of Environmental Management

SN - 0301-4797

ER -