Capacity improvement through adaptive power control in CDMA system

Sieh Kiong Tiong, Kenneth Sim Sing Eng, Mahamod Ismail

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

In event of global wireless communication system becoming more advance, the introduction of code division multiple access (CDMA) pioneered by QualComm, Inc., of San Diego is both timely and favorable. The CDMA interface standard studied in this project is the IS-95 standard. The major attributes of CDMA IS-95 are high system capacity, cost effectiveness and increment in quality of service. The point of interest of this study is capacity improvement through adaptive power control. Three different power control schemes are studied in this research. Eb/No (energy per bit to noise density) is used to measure the reverse link signal quality. The lower the Eb/No, the higher is the capacity. However, there need to be a compromise between Eb/No and capacity as decreasing the Eb/No below a certain limit jeopardizes the link quality.

Original languageEnglish
Title of host publication4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages137-140
Number of pages4
ISBN (Electronic)0780377737, 9780780377738
DOIs
Publication statusPublished - 01 Jan 2003
Event4th National Conference on Telecommunication Technology, NCTT 2003 - Shah Alam, Malaysia
Duration: 14 Jan 200315 Jan 2003

Publication series

Name4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings

Other

Other4th National Conference on Telecommunication Technology, NCTT 2003
CountryMalaysia
CityShah Alam
Period14/01/0315/01/03

Fingerprint

Power control
Code division multiple access
Cost effectiveness
Interfaces (computer)
Quality of service
Communication systems

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications

Cite this

Tiong, S. K., Eng, K. S. S., & Ismail, M. (2003). Capacity improvement through adaptive power control in CDMA system. In 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings (pp. 137-140). [1188320] (4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/NCTT.2003.1188320
Tiong, Sieh Kiong ; Eng, Kenneth Sim Sing ; Ismail, Mahamod. / Capacity improvement through adaptive power control in CDMA system. 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2003. pp. 137-140 (4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings).
@inproceedings{9853d09afb6043c0a1690fd6ead91c59,
title = "Capacity improvement through adaptive power control in CDMA system",
abstract = "In event of global wireless communication system becoming more advance, the introduction of code division multiple access (CDMA) pioneered by QualComm, Inc., of San Diego is both timely and favorable. The CDMA interface standard studied in this project is the IS-95 standard. The major attributes of CDMA IS-95 are high system capacity, cost effectiveness and increment in quality of service. The point of interest of this study is capacity improvement through adaptive power control. Three different power control schemes are studied in this research. Eb/No (energy per bit to noise density) is used to measure the reverse link signal quality. The lower the Eb/No, the higher is the capacity. However, there need to be a compromise between Eb/No and capacity as decreasing the Eb/No below a certain limit jeopardizes the link quality.",
author = "Tiong, {Sieh Kiong} and Eng, {Kenneth Sim Sing} and Mahamod Ismail",
year = "2003",
month = "1",
day = "1",
doi = "10.1109/NCTT.2003.1188320",
language = "English",
series = "4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "137--140",
booktitle = "4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings",
address = "United States",

}

Tiong, SK, Eng, KSS & Ismail, M 2003, Capacity improvement through adaptive power control in CDMA system. in 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings., 1188320, 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 137-140, 4th National Conference on Telecommunication Technology, NCTT 2003, Shah Alam, Malaysia, 14/01/03. https://doi.org/10.1109/NCTT.2003.1188320

Capacity improvement through adaptive power control in CDMA system. / Tiong, Sieh Kiong; Eng, Kenneth Sim Sing; Ismail, Mahamod.

4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2003. p. 137-140 1188320 (4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Capacity improvement through adaptive power control in CDMA system

AU - Tiong, Sieh Kiong

AU - Eng, Kenneth Sim Sing

AU - Ismail, Mahamod

PY - 2003/1/1

Y1 - 2003/1/1

N2 - In event of global wireless communication system becoming more advance, the introduction of code division multiple access (CDMA) pioneered by QualComm, Inc., of San Diego is both timely and favorable. The CDMA interface standard studied in this project is the IS-95 standard. The major attributes of CDMA IS-95 are high system capacity, cost effectiveness and increment in quality of service. The point of interest of this study is capacity improvement through adaptive power control. Three different power control schemes are studied in this research. Eb/No (energy per bit to noise density) is used to measure the reverse link signal quality. The lower the Eb/No, the higher is the capacity. However, there need to be a compromise between Eb/No and capacity as decreasing the Eb/No below a certain limit jeopardizes the link quality.

AB - In event of global wireless communication system becoming more advance, the introduction of code division multiple access (CDMA) pioneered by QualComm, Inc., of San Diego is both timely and favorable. The CDMA interface standard studied in this project is the IS-95 standard. The major attributes of CDMA IS-95 are high system capacity, cost effectiveness and increment in quality of service. The point of interest of this study is capacity improvement through adaptive power control. Three different power control schemes are studied in this research. Eb/No (energy per bit to noise density) is used to measure the reverse link signal quality. The lower the Eb/No, the higher is the capacity. However, there need to be a compromise between Eb/No and capacity as decreasing the Eb/No below a certain limit jeopardizes the link quality.

UR - http://www.scopus.com/inward/record.url?scp=84866237662&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866237662&partnerID=8YFLogxK

U2 - 10.1109/NCTT.2003.1188320

DO - 10.1109/NCTT.2003.1188320

M3 - Conference contribution

T3 - 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings

SP - 137

EP - 140

BT - 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Tiong SK, Eng KSS, Ismail M. Capacity improvement through adaptive power control in CDMA system. In 4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2003. p. 137-140. 1188320. (4th National Conference on Telecommunication Technology, NCTT 2003 - Proceedings). https://doi.org/10.1109/NCTT.2003.1188320