Analysis on structure reliability of solar powered water treatment device (SWAD) prototype

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

An improved water quality is very essential element for aquaculture industry. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The objective of building a prototype solar powered water treatment device (SWAD) is to have an independent power supply without relying from the grid to run the water treatment process through filtration. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. By utilizing CAD simulation, through analysis has been done to determine the suitable size and the type of material for the device structure. The criteria of the structure must be light weight, sturdy and not reactive to water. The structure needs to withstand the total weight of the prototype plus it can float at the water surface.

Original languageEnglish
Title of host publication5th International Conference on Green Design and Manufacture, IConGDM 2019
EditorsShayfull Zamree Bin Abd. Rahim, Mohd Mustafa Al-Bakri Bin Abdullah
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735418714
DOIs
Publication statusPublished - 30 Jul 2019
Event5th International Conference on Green Design and Manufacture 2019, IConGDM 2019 - Kota Bandung, Jawa Barat, Indonesia
Duration: 29 Apr 201930 Apr 2019

Publication series

NameAIP Conference Proceedings
Volume2129
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference5th International Conference on Green Design and Manufacture 2019, IConGDM 2019
CountryIndonesia
CityKota Bandung, Jawa Barat
Period29/04/1930/04/19

Fingerprint

water treatment
prototypes
computer aided design
aquaculture industry
water filters
water
water quality
simulation
floats
surface water
lakes
power supplies
floating
body water
filter
industries
grids
lake
filters
fabrication

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

Cite this

Ismail, I. N., Khean, F. F., Zawawi, M. H., Zahari, N. M., Abidin, S. Z., Yusairah, W. N., ... Abd. Rahman, M. S. (2019). Analysis on structure reliability of solar powered water treatment device (SWAD) prototype. In S. Z. B. A. Rahim, & M. M. A-B. B. Abdullah (Eds.), 5th International Conference on Green Design and Manufacture, IConGDM 2019 [020018] (AIP Conference Proceedings; Vol. 2129). American Institute of Physics Inc.. https://doi.org/10.1063/1.5118026
Ismail, Iszmir Nazmi ; Khean, Foo Fang ; Zawawi, Mohd Hafiz ; Zahari, N. M. ; Abidin, S. Z. ; Yusairah, W. N. ; Mahmood Zuhdi, Ahmad Wafi ; Mohd Roslan, Mohd Eqwan ; Mohamed, Hassan ; Ramli, Mohd Zakwan ; Mansor, Mohd Helmi ; Adria Syaifoel, Fevilia Nurnadia ; Zakaria, A. A. ; Isa, Mohd Rashdan ; Mohamad, Daud ; Jaafar, M. F. ; Rahmat, Nur Azzammudin ; Abd. Rahman, Muhamad Safwan. / Analysis on structure reliability of solar powered water treatment device (SWAD) prototype. 5th International Conference on Green Design and Manufacture, IConGDM 2019. editor / Shayfull Zamree Bin Abd. Rahim ; Mohd Mustafa Al-Bakri Bin Abdullah. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).
@inproceedings{56237013721840cfbd76075303849f71,
title = "Analysis on structure reliability of solar powered water treatment device (SWAD) prototype",
abstract = "An improved water quality is very essential element for aquaculture industry. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The objective of building a prototype solar powered water treatment device (SWAD) is to have an independent power supply without relying from the grid to run the water treatment process through filtration. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. By utilizing CAD simulation, through analysis has been done to determine the suitable size and the type of material for the device structure. The criteria of the structure must be light weight, sturdy and not reactive to water. The structure needs to withstand the total weight of the prototype plus it can float at the water surface.",
author = "Ismail, {Iszmir Nazmi} and Khean, {Foo Fang} and Zawawi, {Mohd Hafiz} and Zahari, {N. M.} and Abidin, {S. Z.} and Yusairah, {W. N.} and {Mahmood Zuhdi}, {Ahmad Wafi} and {Mohd Roslan}, {Mohd Eqwan} and Hassan Mohamed and Ramli, {Mohd Zakwan} and Mansor, {Mohd Helmi} and {Adria Syaifoel}, {Fevilia Nurnadia} and Zakaria, {A. A.} and Isa, {Mohd Rashdan} and Daud Mohamad and Jaafar, {M. F.} and Rahmat, {Nur Azzammudin} and {Abd. Rahman}, {Muhamad Safwan}",
year = "2019",
month = "7",
day = "30",
doi = "10.1063/1.5118026",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Rahim, {Shayfull Zamree Bin Abd.} and Abdullah, {Mohd Mustafa Al-Bakri Bin}",
booktitle = "5th International Conference on Green Design and Manufacture, IConGDM 2019",

}

Ismail, IN, Khean, FF, Zawawi, MH, Zahari, NM, Abidin, SZ, Yusairah, WN, Mahmood Zuhdi, AW, Mohd Roslan, ME, Mohamed, H, Ramli, MZ, Mansor, MH, Adria Syaifoel, FN, Zakaria, AA, Isa, MR, Mohamad, D, Jaafar, MF, Rahmat, NA & Abd. Rahman, MS 2019, Analysis on structure reliability of solar powered water treatment device (SWAD) prototype. in SZBA Rahim & MMA-BB Abdullah (eds), 5th International Conference on Green Design and Manufacture, IConGDM 2019., 020018, AIP Conference Proceedings, vol. 2129, American Institute of Physics Inc., 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, Kota Bandung, Jawa Barat, Indonesia, 29/04/19. https://doi.org/10.1063/1.5118026

Analysis on structure reliability of solar powered water treatment device (SWAD) prototype. / Ismail, Iszmir Nazmi; Khean, Foo Fang; Zawawi, Mohd Hafiz; Zahari, N. M.; Abidin, S. Z.; Yusairah, W. N.; Mahmood Zuhdi, Ahmad Wafi; Mohd Roslan, Mohd Eqwan; Mohamed, Hassan; Ramli, Mohd Zakwan; Mansor, Mohd Helmi; Adria Syaifoel, Fevilia Nurnadia; Zakaria, A. A.; Isa, Mohd Rashdan; Mohamad, Daud; Jaafar, M. F.; Rahmat, Nur Azzammudin; Abd. Rahman, Muhamad Safwan.

5th International Conference on Green Design and Manufacture, IConGDM 2019. ed. / Shayfull Zamree Bin Abd. Rahim; Mohd Mustafa Al-Bakri Bin Abdullah. American Institute of Physics Inc., 2019. 020018 (AIP Conference Proceedings; Vol. 2129).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Analysis on structure reliability of solar powered water treatment device (SWAD) prototype

AU - Ismail, Iszmir Nazmi

AU - Khean, Foo Fang

AU - Zawawi, Mohd Hafiz

AU - Zahari, N. M.

AU - Abidin, S. Z.

AU - Yusairah, W. N.

AU - Mahmood Zuhdi, Ahmad Wafi

AU - Mohd Roslan, Mohd Eqwan

AU - Mohamed, Hassan

AU - Ramli, Mohd Zakwan

AU - Mansor, Mohd Helmi

AU - Adria Syaifoel, Fevilia Nurnadia

AU - Zakaria, A. A.

AU - Isa, Mohd Rashdan

AU - Mohamad, Daud

AU - Jaafar, M. F.

AU - Rahmat, Nur Azzammudin

AU - Abd. Rahman, Muhamad Safwan

PY - 2019/7/30

Y1 - 2019/7/30

N2 - An improved water quality is very essential element for aquaculture industry. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The objective of building a prototype solar powered water treatment device (SWAD) is to have an independent power supply without relying from the grid to run the water treatment process through filtration. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. By utilizing CAD simulation, through analysis has been done to determine the suitable size and the type of material for the device structure. The criteria of the structure must be light weight, sturdy and not reactive to water. The structure needs to withstand the total weight of the prototype plus it can float at the water surface.

AB - An improved water quality is very essential element for aquaculture industry. Solar powered water treatment device is basically a floating water filter which operates in a self-sustainable way on calm water body such as lake. The objective of building a prototype solar powered water treatment device (SWAD) is to have an independent power supply without relying from the grid to run the water treatment process through filtration. The project undergoes preliminary design, CAD drawings with simulation, prototype fabrication and prototype testing. By utilizing CAD simulation, through analysis has been done to determine the suitable size and the type of material for the device structure. The criteria of the structure must be light weight, sturdy and not reactive to water. The structure needs to withstand the total weight of the prototype plus it can float at the water surface.

UR - http://www.scopus.com/inward/record.url?scp=85070557619&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070557619&partnerID=8YFLogxK

U2 - 10.1063/1.5118026

DO - 10.1063/1.5118026

M3 - Conference contribution

AN - SCOPUS:85070557619

T3 - AIP Conference Proceedings

BT - 5th International Conference on Green Design and Manufacture, IConGDM 2019

A2 - Rahim, Shayfull Zamree Bin Abd.

A2 - Abdullah, Mohd Mustafa Al-Bakri Bin

PB - American Institute of Physics Inc.

ER -

Ismail IN, Khean FF, Zawawi MH, Zahari NM, Abidin SZ, Yusairah WN et al. Analysis on structure reliability of solar powered water treatment device (SWAD) prototype. In Rahim SZBA, Abdullah MMA-BB, editors, 5th International Conference on Green Design and Manufacture, IConGDM 2019. American Institute of Physics Inc. 2019. 020018. (AIP Conference Proceedings). https://doi.org/10.1063/1.5118026