An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness

Tiagrajah V. Janahiraman, Nooraziah Ahmad

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A computer based modelling and prediction method is vital in the field of Computer Numerical Control based cutting operation. The final quality of finished surface is mainly influenced by the interaction between the work piece, cutting tool and machining system. Therefore, many researchers attempted to develop an efficient prediction systems for surface roughness before machining. In this paper, Optimal Pruned Extreme Learning Machine (OPELM) is proposed for modelling and predicting surface roughness with respect to its cutting parameters in turning based machining process. The surface roughness models obtained from other methods such as Response Surface Method, Neural Network and Extreme Learning Machine were compared with the experimental results. Our experimental study consist of 15 workpieces that were used for cutting using turning operation. The correlation between the input parameters such as feed rate, cutting speed and depth of cut with surface roughness was modelled using OPELM. Based on our study, OPELM performed the best in modelling and predicting based on unknown set of input.

Original languageEnglish
Title of host publicationConference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN
Subtitle of host publicationCultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages276-280
Number of pages5
ISBN (Electronic)9781479954230
DOIs
Publication statusPublished - 23 Mar 2015
Event6th International Conference on Information Technology and Multimedia, ICIMU 2014 - Putrajaya, Malaysia
Duration: 18 Nov 201420 Nov 2014

Publication series

NameConference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014

Other

Other6th International Conference on Information Technology and Multimedia, ICIMU 2014
CountryMalaysia
CityPutrajaya
Period18/11/1420/11/14

Fingerprint

Learning systems
Surface roughness
Machining
Cutting tools
Neural networks

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications
  • Computer Science Applications
  • Information Systems
  • Software

Cite this

V. Janahiraman, T., & Ahmad, N. (2015). An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness. In Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014 (pp. 276-280). [7066644] (Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIMU.2014.7066644
V. Janahiraman, Tiagrajah ; Ahmad, Nooraziah. / An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness. Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 276-280 (Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014).
@inproceedings{8acd74dea2a84d719cc920747c3cce01,
title = "An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness",
abstract = "A computer based modelling and prediction method is vital in the field of Computer Numerical Control based cutting operation. The final quality of finished surface is mainly influenced by the interaction between the work piece, cutting tool and machining system. Therefore, many researchers attempted to develop an efficient prediction systems for surface roughness before machining. In this paper, Optimal Pruned Extreme Learning Machine (OPELM) is proposed for modelling and predicting surface roughness with respect to its cutting parameters in turning based machining process. The surface roughness models obtained from other methods such as Response Surface Method, Neural Network and Extreme Learning Machine were compared with the experimental results. Our experimental study consist of 15 workpieces that were used for cutting using turning operation. The correlation between the input parameters such as feed rate, cutting speed and depth of cut with surface roughness was modelled using OPELM. Based on our study, OPELM performed the best in modelling and predicting based on unknown set of input.",
author = "{V. Janahiraman}, Tiagrajah and Nooraziah Ahmad",
year = "2015",
month = "3",
day = "23",
doi = "10.1109/ICIMU.2014.7066644",
language = "English",
series = "Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "276--280",
booktitle = "Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN",
address = "United States",

}

V. Janahiraman, T & Ahmad, N 2015, An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness. in Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014., 7066644, Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014, Institute of Electrical and Electronics Engineers Inc., pp. 276-280, 6th International Conference on Information Technology and Multimedia, ICIMU 2014, Putrajaya, Malaysia, 18/11/14. https://doi.org/10.1109/ICIMU.2014.7066644

An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness. / V. Janahiraman, Tiagrajah; Ahmad, Nooraziah.

Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014. Institute of Electrical and Electronics Engineers Inc., 2015. p. 276-280 7066644 (Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness

AU - V. Janahiraman, Tiagrajah

AU - Ahmad, Nooraziah

PY - 2015/3/23

Y1 - 2015/3/23

N2 - A computer based modelling and prediction method is vital in the field of Computer Numerical Control based cutting operation. The final quality of finished surface is mainly influenced by the interaction between the work piece, cutting tool and machining system. Therefore, many researchers attempted to develop an efficient prediction systems for surface roughness before machining. In this paper, Optimal Pruned Extreme Learning Machine (OPELM) is proposed for modelling and predicting surface roughness with respect to its cutting parameters in turning based machining process. The surface roughness models obtained from other methods such as Response Surface Method, Neural Network and Extreme Learning Machine were compared with the experimental results. Our experimental study consist of 15 workpieces that were used for cutting using turning operation. The correlation between the input parameters such as feed rate, cutting speed and depth of cut with surface roughness was modelled using OPELM. Based on our study, OPELM performed the best in modelling and predicting based on unknown set of input.

AB - A computer based modelling and prediction method is vital in the field of Computer Numerical Control based cutting operation. The final quality of finished surface is mainly influenced by the interaction between the work piece, cutting tool and machining system. Therefore, many researchers attempted to develop an efficient prediction systems for surface roughness before machining. In this paper, Optimal Pruned Extreme Learning Machine (OPELM) is proposed for modelling and predicting surface roughness with respect to its cutting parameters in turning based machining process. The surface roughness models obtained from other methods such as Response Surface Method, Neural Network and Extreme Learning Machine were compared with the experimental results. Our experimental study consist of 15 workpieces that were used for cutting using turning operation. The correlation between the input parameters such as feed rate, cutting speed and depth of cut with surface roughness was modelled using OPELM. Based on our study, OPELM performed the best in modelling and predicting based on unknown set of input.

UR - http://www.scopus.com/inward/record.url?scp=84937510545&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937510545&partnerID=8YFLogxK

U2 - 10.1109/ICIMU.2014.7066644

DO - 10.1109/ICIMU.2014.7066644

M3 - Conference contribution

T3 - Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014

SP - 276

EP - 280

BT - Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

V. Janahiraman T, Ahmad N. An Optimal-Pruned Extreme Learning Machine based modelling of surface roughness. In Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014. Institute of Electrical and Electronics Engineers Inc. 2015. p. 276-280. 7066644. (Conference Proceedings - 6th International Conference on Information Technology and Multimedia at UNITEN: Cultivating Creativity and Enabling Technology Through the Internet of Things, ICIMU 2014). https://doi.org/10.1109/ICIMU.2014.7066644