An analysis of transient stability using center-of-inertia

Angle and speed

Halimatun Hashim, M. R. Zulkepali, Ya'Akob Raja Omar, N. Ismail, Izham Zainal Abidin, S. Yusof

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Instability in the system may cause the rotor angle of the machine to accelerate or decelerate depending on the mechanical power and electrical power; most seriously could result to tripping of the machine This paper evaluates the impact of disturbances and types of loads to system stability using Area-based COI-referred Transient Stability Indexes: COI angle and COI speed. The analysis is carried out using PSS®E 32 software on IEEE 118 Bus Test System at system conditions with and without dynamic loads. The network is initially divided into significant areas based on the geographical.

Original languageEnglish
Title of host publicationPECon2010 - 2010 IEEE International Conference on Power and Energy
Pages402-407
Number of pages6
DOIs
Publication statusPublished - 01 Dec 2010
Event2010 IEEE International Conference on Power and Energy, PECon2010 - Kuala Lumpur, Malaysia
Duration: 29 Nov 201001 Dec 2010

Publication series

NamePECon2010 - 2010 IEEE International Conference on Power and Energy

Other

Other2010 IEEE International Conference on Power and Energy, PECon2010
CountryMalaysia
CityKuala Lumpur
Period29/11/1001/12/10

Fingerprint

Dynamic loads
System stability
Rotors

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology

Cite this

Hashim, H., Zulkepali, M. R., Raja Omar, YA., Ismail, N., Zainal Abidin, I., & Yusof, S. (2010). An analysis of transient stability using center-of-inertia: Angle and speed. In PECon2010 - 2010 IEEE International Conference on Power and Energy (pp. 402-407). [5697617] (PECon2010 - 2010 IEEE International Conference on Power and Energy). https://doi.org/10.1109/PECON.2010.5697617
Hashim, Halimatun ; Zulkepali, M. R. ; Raja Omar, Ya'Akob ; Ismail, N. ; Zainal Abidin, Izham ; Yusof, S. / An analysis of transient stability using center-of-inertia : Angle and speed. PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. pp. 402-407 (PECon2010 - 2010 IEEE International Conference on Power and Energy).
@inproceedings{8fc2ad1c84c14b139778d53684623afb,
title = "An analysis of transient stability using center-of-inertia: Angle and speed",
abstract = "Instability in the system may cause the rotor angle of the machine to accelerate or decelerate depending on the mechanical power and electrical power; most seriously could result to tripping of the machine This paper evaluates the impact of disturbances and types of loads to system stability using Area-based COI-referred Transient Stability Indexes: COI angle and COI speed. The analysis is carried out using PSS{\circledR}E 32 software on IEEE 118 Bus Test System at system conditions with and without dynamic loads. The network is initially divided into significant areas based on the geographical.",
author = "Halimatun Hashim and Zulkepali, {M. R.} and {Raja Omar}, Ya'Akob and N. Ismail and {Zainal Abidin}, Izham and S. Yusof",
year = "2010",
month = "12",
day = "1",
doi = "10.1109/PECON.2010.5697617",
language = "English",
isbn = "9781424489466",
series = "PECon2010 - 2010 IEEE International Conference on Power and Energy",
pages = "402--407",
booktitle = "PECon2010 - 2010 IEEE International Conference on Power and Energy",

}

Hashim, H, Zulkepali, MR, Raja Omar, YA, Ismail, N, Zainal Abidin, I & Yusof, S 2010, An analysis of transient stability using center-of-inertia: Angle and speed. in PECon2010 - 2010 IEEE International Conference on Power and Energy., 5697617, PECon2010 - 2010 IEEE International Conference on Power and Energy, pp. 402-407, 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur, Malaysia, 29/11/10. https://doi.org/10.1109/PECON.2010.5697617

An analysis of transient stability using center-of-inertia : Angle and speed. / Hashim, Halimatun; Zulkepali, M. R.; Raja Omar, Ya'Akob; Ismail, N.; Zainal Abidin, Izham; Yusof, S.

PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. p. 402-407 5697617 (PECon2010 - 2010 IEEE International Conference on Power and Energy).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - An analysis of transient stability using center-of-inertia

T2 - Angle and speed

AU - Hashim, Halimatun

AU - Zulkepali, M. R.

AU - Raja Omar, Ya'Akob

AU - Ismail, N.

AU - Zainal Abidin, Izham

AU - Yusof, S.

PY - 2010/12/1

Y1 - 2010/12/1

N2 - Instability in the system may cause the rotor angle of the machine to accelerate or decelerate depending on the mechanical power and electrical power; most seriously could result to tripping of the machine This paper evaluates the impact of disturbances and types of loads to system stability using Area-based COI-referred Transient Stability Indexes: COI angle and COI speed. The analysis is carried out using PSS®E 32 software on IEEE 118 Bus Test System at system conditions with and without dynamic loads. The network is initially divided into significant areas based on the geographical.

AB - Instability in the system may cause the rotor angle of the machine to accelerate or decelerate depending on the mechanical power and electrical power; most seriously could result to tripping of the machine This paper evaluates the impact of disturbances and types of loads to system stability using Area-based COI-referred Transient Stability Indexes: COI angle and COI speed. The analysis is carried out using PSS®E 32 software on IEEE 118 Bus Test System at system conditions with and without dynamic loads. The network is initially divided into significant areas based on the geographical.

UR - http://www.scopus.com/inward/record.url?scp=79951803069&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79951803069&partnerID=8YFLogxK

U2 - 10.1109/PECON.2010.5697617

DO - 10.1109/PECON.2010.5697617

M3 - Conference contribution

SN - 9781424489466

T3 - PECon2010 - 2010 IEEE International Conference on Power and Energy

SP - 402

EP - 407

BT - PECon2010 - 2010 IEEE International Conference on Power and Energy

ER -

Hashim H, Zulkepali MR, Raja Omar YA, Ismail N, Zainal Abidin I, Yusof S. An analysis of transient stability using center-of-inertia: Angle and speed. In PECon2010 - 2010 IEEE International Conference on Power and Energy. 2010. p. 402-407. 5697617. (PECon2010 - 2010 IEEE International Conference on Power and Energy). https://doi.org/10.1109/PECON.2010.5697617