A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

The integration of solar PVs which is projected to increase over the years creates concerns over stability. Reverse power flow occurs due to high PV penetration into the power system network. PV placement at proper locations in a transmission system is essential to maintain voltage stability. Improper placement will caused voltage stability of the system to be affected. However, if the PVs are connected at a strategic location it will lead to a more stable system. This paper presents a methodology for PV source placement in the transmission system while maintaining the stability of the. Voltage Stability Index (VSI) will be used as an indicator to measure the stability status of the system. Two test systems will be used for simulation for this research, the IEEE 30 Bus and 57 Bus Test System. The simulation results showed that proper placement of the PV source in the transmission system will lead to better stability to the system.

Original languageEnglish
Title of host publicationConference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014
EditorsMohd Izhwan Muhamad, Mohammad Nawawi Seroji
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages226-230
Number of pages5
ISBN (Electronic)9781479972975
DOIs
Publication statusPublished - 17 Mar 2014
Event2014 IEEE International Conference on Power and Energy, PECon 2014 - Kuching, Sarawak, Malaysia
Duration: 01 Dec 201403 Dec 2014

Publication series

NameConference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

Other

Other2014 IEEE International Conference on Power and Energy, PECon 2014
CountryMalaysia
CityKuching, Sarawak
Period01/12/1403/12/14

Fingerprint

Voltage control

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Sie, A. W. H., Zainal Abidin, I., & Hashim, H. (2014). A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI). In M. I. Muhamad, & M. N. Seroji (Eds.), Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014 (pp. 226-230). [7062446] (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PECON.2014.7062446
Sie, Adrian W.H. ; Zainal Abidin, Izham ; Hashim, Halimatun. / A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI). Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. editor / Mohd Izhwan Muhamad ; Mohammad Nawawi Seroji. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 226-230 (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014).
@inproceedings{faa31842360147fb9eff31d395d1e29e,
title = "A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI)",
abstract = "The integration of solar PVs which is projected to increase over the years creates concerns over stability. Reverse power flow occurs due to high PV penetration into the power system network. PV placement at proper locations in a transmission system is essential to maintain voltage stability. Improper placement will caused voltage stability of the system to be affected. However, if the PVs are connected at a strategic location it will lead to a more stable system. This paper presents a methodology for PV source placement in the transmission system while maintaining the stability of the. Voltage Stability Index (VSI) will be used as an indicator to measure the stability status of the system. Two test systems will be used for simulation for this research, the IEEE 30 Bus and 57 Bus Test System. The simulation results showed that proper placement of the PV source in the transmission system will lead to better stability to the system.",
author = "Sie, {Adrian W.H.} and {Zainal Abidin}, Izham and Halimatun Hashim",
year = "2014",
month = "3",
day = "17",
doi = "10.1109/PECON.2014.7062446",
language = "English",
series = "Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "226--230",
editor = "Muhamad, {Mohd Izhwan} and Seroji, {Mohammad Nawawi}",
booktitle = "Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014",
address = "United States",

}

Sie, AWH, Zainal Abidin, I & Hashim, H 2014, A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI). in MI Muhamad & MN Seroji (eds), Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014., 7062446, Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014, Institute of Electrical and Electronics Engineers Inc., pp. 226-230, 2014 IEEE International Conference on Power and Energy, PECon 2014, Kuching, Sarawak, Malaysia, 01/12/14. https://doi.org/10.1109/PECON.2014.7062446

A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI). / Sie, Adrian W.H.; Zainal Abidin, Izham; Hashim, Halimatun.

Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. ed. / Mohd Izhwan Muhamad; Mohammad Nawawi Seroji. Institute of Electrical and Electronics Engineers Inc., 2014. p. 226-230 7062446 (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI)

AU - Sie, Adrian W.H.

AU - Zainal Abidin, Izham

AU - Hashim, Halimatun

PY - 2014/3/17

Y1 - 2014/3/17

N2 - The integration of solar PVs which is projected to increase over the years creates concerns over stability. Reverse power flow occurs due to high PV penetration into the power system network. PV placement at proper locations in a transmission system is essential to maintain voltage stability. Improper placement will caused voltage stability of the system to be affected. However, if the PVs are connected at a strategic location it will lead to a more stable system. This paper presents a methodology for PV source placement in the transmission system while maintaining the stability of the. Voltage Stability Index (VSI) will be used as an indicator to measure the stability status of the system. Two test systems will be used for simulation for this research, the IEEE 30 Bus and 57 Bus Test System. The simulation results showed that proper placement of the PV source in the transmission system will lead to better stability to the system.

AB - The integration of solar PVs which is projected to increase over the years creates concerns over stability. Reverse power flow occurs due to high PV penetration into the power system network. PV placement at proper locations in a transmission system is essential to maintain voltage stability. Improper placement will caused voltage stability of the system to be affected. However, if the PVs are connected at a strategic location it will lead to a more stable system. This paper presents a methodology for PV source placement in the transmission system while maintaining the stability of the. Voltage Stability Index (VSI) will be used as an indicator to measure the stability status of the system. Two test systems will be used for simulation for this research, the IEEE 30 Bus and 57 Bus Test System. The simulation results showed that proper placement of the PV source in the transmission system will lead to better stability to the system.

UR - http://www.scopus.com/inward/record.url?scp=84946691868&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946691868&partnerID=8YFLogxK

U2 - 10.1109/PECON.2014.7062446

DO - 10.1109/PECON.2014.7062446

M3 - Conference contribution

T3 - Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

SP - 226

EP - 230

BT - Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014

A2 - Muhamad, Mohd Izhwan

A2 - Seroji, Mohammad Nawawi

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Sie AWH, Zainal Abidin I, Hashim H. A methodology to determine suitable placement of solar photovoltaic sources in the transmission system taking into account Voltage Stability Index (VSI). In Muhamad MI, Seroji MN, editors, Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 226-230. 7062446. (Conference Proceeding - 2014 IEEE International Conference on Power and Energy, PECon 2014). https://doi.org/10.1109/PECON.2014.7062446